AutoCodes – Chevrolet – P0060 2015 Chevrolet Silverado

P0060 2015 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2015 Chevrolet Silverado indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 385

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2015 Chevrolet Silverado Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2015 Chevrolet Silverado - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2015 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2015 Chevrolet Silverado?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2015 Chevrolet Silverado code?

Need more information on how to fix the P0060 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P0060 in a 2015 Chevrolet Silverado?

The common symptoms of code P0060 in a 2015 Chevrolet Silverado include issues with engine performance, reduced fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P0060 for a 2015 Chevrolet Silverado mean?

The OBDII code P0060 for a 2015 Chevrolet Silverado refers to a malfunction in the heater circuit of the oxygen sensor located in Bank 2 Sensor 2.

3. What are the possible causes of OBDII code P0060 in a 2015 Chevrolet Silverado?

Possible causes of code P0060 in a 2015 Chevrolet Silverado include a faulty oxygen sensor, damaged wiring or connectors, or a problem with the sensor's heating element.

4. How can I diagnose the OBDII code P0060 in my 2015 Chevrolet Silverado?

To diagnose code P0060 in a 2015 Chevrolet Silverado, you can use an OBDII scanner to retrieve the trouble codes, inspect the wiring and connectors of the affected oxygen sensor, and test the sensor's heating element for resistance.

5. Can I still drive my 2015 Chevrolet Silverado with OBDII code P0060?

It is not recommended to drive your 2015 Chevrolet Silverado with code P0060, as it can lead to reduced performance and fuel efficiency. It is best to address the issue promptly to prevent further damage.

6. How do I repair OBDII code P0060 in my 2015 Chevrolet Silverado?

To repair code P0060 in a 2015 Chevrolet Silverado, you may need to replace the oxygen sensor in Bank 2 Sensor 2, repair any damaged wiring or connectors, or address any issues with the sensor's heating element.

7. Is it possible to reset the OBDII code P0060 in a 2015 Chevrolet Silverado without fixing the issue?

While you can clear the trouble codes using an OBDII scanner, the Check Engine Light will likely reappear if the underlying issue causing code P0060 in your 2015 Chevrolet Silverado is not resolved.

8. How much does it cost to fix OBDII code P0060 in a 2015 Chevrolet Silverado?

The cost to fix code P0060 in a 2015 Chevrolet Silverado can vary depending on the cause of the issue. Replacing an oxygen sensor or repairing wiring typically ranges from $100 to $300, including parts and labor.

9. Can a DIY enthusiast repair OBDII code P0060 in a 2015 Chevrolet Silverado?

If you have experience with automotive repairs and access to the necessary tools, you may be able to repair code P0060 in a 2015 Chevrolet Silverado yourself by following the proper diagnostic and repair procedures.

10. How long does it take to fix OBDII code P0060 in a 2015 Chevrolet Silverado?

The time it takes to fix code P0060 in a 2015 Chevrolet Silverado can vary depending on the extent of the issue and your experience level. Typically, the repair can be completed within a few hours to a half day.