AutoCodes – Chevrolet – P0060 2014 Chevrolet Silverado

P0060 2014 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2014 Chevrolet Silverado indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 572

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2014 Chevrolet Silverado Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2014 Chevrolet Silverado - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2014 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2014 Chevrolet Silverado?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2014 Chevrolet Silverado code?

Need more information on how to fix the P0060 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2014 Chevrolet Silverado Code

1. What does OBDII code P0060 on a 2014 Chevrolet Silverado indicate?

- OBDII code P0060 for a 2014 Chevrolet Silverado refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2 Sensor 2.

2. What are the common symptoms of OBDII code P0060 in a 2014 Chevrolet Silverado?

- Common symptoms of OBDII code P0060 include reduced fuel efficiency, rough idling, and an illuminated Check Engine Light.

3. What are the possible causes of OBDII code P0060 on a 2014 Chevrolet Silverado?

- Potential causes of OBDII code P0060 can include a faulty HO2S sensor, damaged wiring or connectors, or a malfunctioning engine control module (ECM).

4. How can I diagnose OBDII code P0060 on my 2014 Chevrolet Silverado?

- Diagnosis of OBDII code P0060 typically involves using an OBDII scanner to retrieve the code, inspecting the HO2S sensor and related components, and testing the sensor's resistance.

5. Can I continue to drive my 2014 Chevrolet Silverado with OBDII code P0060?

- It is not recommended to drive your vehicle with OBDII code P0060, as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair OBDII code P0060 on my 2014 Chevrolet Silverado?

- Repairing OBDII code P0060 may involve replacing the faulty HO2S sensor, repairing damaged wiring or connectors, or reprogramming the ECM to address the issue.

7. Is it possible to reset OBDII code P0060 on a 2014 Chevrolet Silverado without fixing the underlying problem?

- While you can clear the code with an OBDII scanner, it is crucial to address the root cause of OBDII code P0060 to prevent future issues.

8. Are there any DIY tips for resolving OBDII code P0060 on a 2014 Chevrolet Silverado?

- DIY tips for addressing OBDII code P0060 include checking the sensor's wiring for breaks, ensuring proper connections, and consulting the vehicle's service manual for specific instructions.

9. How much does it typically cost to repair OBDII code P0060 on a 2014 Chevrolet Silverado?

- The cost of repairing OBDII code P0060 can vary depending on the extent of the issue, but it may range from $100 to $300 for parts and labor.

10. Can a mechanic help me fix OBDII code P0060 on my 2014 Chevrolet Silverado?

- Yes, a qualified mechanic can diagnose and repair OBDII code P0060 on your 2014 Chevrolet Silverado using professional tools and expertise.

Discuss the causes and fixes for P0060 2014 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P0060 2014 Chevrolet Silverado comments

No comments found for this page.

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.