AutoCodes – Ford – P0060 2012 Ford Fusion

P0060 2012 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0060 2012 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,792

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2012 Ford Fusion Description

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensor to reach operating temperature. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Powertrain Control Module (PCM). The PCM commands the heater ON or OFF to maintain a specific HO2S operating temperature range. The PCM determines the temperature by measuring the current flow through the heater. When the heater is in the ON state, the PCM will pulse the heater OFF for 50 ms, once per second. The PCM calculates the heater resistance on a cold start. The Diagnostic Trouble Code (DTC) will set if the heater current requirements too low or high in the HO2S heater control circuit.

OBDII Code P0060 2012 Ford Fusion - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2012 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2012 Ford Fusion?

Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0060 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2012 Ford Fusion code?

Need more information on how to fix the P0060 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2012 Ford Fusion Code

1. What are the common symptoms of OBDII code P0060 in a 2012 Ford Fusion?

- Common symptoms include poor engine performance, increased fuel consumption, and the illumination of the check engine light.

2. What does the OBDII code P0060 "HO2S Heater Resistance Bank 2 Sensor 2" indicate in a 2012 Ford Fusion?

- This code indicates a malfunction in the oxygen sensor heater circuit of the downstream (post-catalytic converter) sensor on bank 2 of the engine.

3. What are the possible causes of OBDII code P0060 in a 2012 Ford Fusion?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or an issue with the engine control module (ECM).

4. How can I diagnose the OBDII code P0060 in my 2012 Ford Fusion?

- Diagnosing this code involves checking the wiring and connectors related to the bank 2 sensor 2 oxygen sensor heater circuit, testing the sensor itself, and inspecting the fuse and ECM for faults.

5. Can I continue driving my 2012 Ford Fusion with OBDII code P0060 active?

- It is generally not recommended to drive with this code active, as it can negatively impact engine performance and emissions. It is best to address the underlying issue promptly.

6. How should I repair OBDII code P0060 in a 2012 Ford Fusion?

- Repairing this code may involve replacing the bank 2 sensor 2 oxygen sensor, repairing or replacing damaged wiring or connectors, checking and replacing the fuse if necessary, and addressing any ECM issues.

7. Is it possible to clear the OBDII code P0060 in a 2012 Ford Fusion without fixing the issue?

- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as the issue may persist and trigger the code again.

8. Are there any DIY tips for resolving OBDII code P0060 in a 2012 Ford Fusion?

- DIY tips include checking the sensor wiring for damage, ensuring proper sensor connection, and inspecting the fuse related to the sensor heater circuit. However, complex repairs may require professional assistance.

9. How much does it typically cost to repair OBDII code P0060 in a 2012 Ford Fusion?

- The cost of repair can vary depending on the specific issue causing the code. Costs may include the price of a new oxygen sensor, wiring repairs, or ECM diagnostics, so it is advisable to obtain a professional quote.

10. Will fixing OBDII code P0060 improve the overall performance and fuel efficiency of my 2012 Ford Fusion?

- Yes, resolving this code can help restore optimal engine performance, improve fuel efficiency, and ensure proper emissions control, leading to a smoother and more efficient driving experience.