AutoCodes – Ford – P0059 2010 Ford Fusion

P0059 2010 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 1

Quick Answer

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0059 2010 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 1.
Common causes: Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,743

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0059 2010 Ford Fusion Description

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensor to reach operating temperature. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Powertrain Control Module (PCM). The PCM commands the heater ON or OFF to maintain a specific HO2S operating temperature range. The PCM determines the temperature by measuring the current flow through the heater. When the heater is in the ON state, the PCM will pulse the heater OFF for 50 ms, once per second. The PCM calculates the heater resistance on a cold start. The Diagnostic Trouble Code (DTC) will set if the heater current requirements too low or high in the HO2S heater control circuit.

OBDII Code P0059 2010 Ford Fusion - HO2S Heater Resistance Bank 2 Sensor 1 - AutoCodes.com — P0059 2010 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0059 2010 Ford Fusion?

Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted
Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0059 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0059 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0059 2010 Ford Fusion code?

Need more information on how to fix the P0059 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0059 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0059 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0059 on a 2010 Ford Fusion?

The common symptoms of code P0059 include poor fuel economy, rough idle, engine misfires, and an illuminated check engine light.

2. What does the OBDII code P0059 indicate on a 2010 Ford Fusion?

Code P0059 indicates an issue with the HO2S (Heated Oxygen Sensor) heater resistance on Bank 2 Sensor 1 in the exhaust system of the vehicle.

3. What are the possible causes of OBDII code P0059 on a 2010 Ford Fusion?

Possible causes of code P0059 include a faulty HO2S heater, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose the OBDII code P0059 on a 2010 Ford Fusion?

Diagnosing code P0059 involves checking the wiring and connectors for damage, testing the HO2S heater resistance, inspecting the fuse, and scanning the ECM for any related faults.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P0059?

It is not recommended to drive your vehicle with an unresolved P0059 code, as it can lead to poor engine performance and potential damage to the catalytic converter over time.

6. How can I repair OBDII code P0059 on a 2010 Ford Fusion?

Repairing code P0059 may involve replacing the HO2S sensor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, and clearing the fault code.

7. Is it possible to reset the OBDII code P0059 on a 2010 Ford Fusion without fixing the issue?

Resetting the code without fixing the underlying issue will only temporarily turn off the check engine light, but the problem will likely resurface if not addressed.

8. Are there any preventive measures to avoid OBDII code P0059 on a 2010 Ford Fusion?

Regular maintenance of the oxygen sensors and monitoring the vehicle's overall health can help prevent issues like code P0059 from occurring.

9. Can a DIY enthusiast tackle the repair of OBDII code P0059 on a 2010 Ford Fusion?

While some aspects of diagnosing and repairing code P0059 can be tackled by a DIY enthusiast, it is recommended to have a professional mechanic perform the repair for accurate diagnosis and proper fix.

10. How long does it typically take to repair OBDII code P0059 on a 2010 Ford Fusion?

The repair time for code P0059 can vary depending on the exact cause of the issue, but it may take anywhere from 1 to 3 hours for a mechanic to diagnose and repair the problem.