P0058 2004 Nissan Maxima Code - HO2S22 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 2004 Nissan Maxima indicates HO2S22 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0058 2004 Nissan Maxima Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0058 2004 Nissan Maxima?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0058 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0058 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0058 2004 Nissan Maxima code?
Need more information on how to fix the P0058 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 2004 Nissan Maxima Code
1. What are common symptoms of OBDII code P0058 on a 2004 Nissan Maxima?
- Common symptoms include reduced fuel efficiency, rough idling, and the illumination of the Check Engine Light.
2. What does the OBDII code P0058 for a 2004 Nissan Maxima indicate?
- The code P0058 indicates a malfunction in the HO2S22 (Heated Oxygen Sensor Bank 2 Sensor 2) heater control circuit, showing that the sensor is experiencing high voltage.
3. What are possible causes of OBDII code P0058 on a 2004 Nissan Maxima?
- Possible causes include a faulty HO2S22, damaged wiring or connectors in the heater circuit, or issues with the engine control module (ECM).
4. How can I diagnose the OBDII code P0058 on my 2004 Nissan Maxima?
- Diagnose by checking the HO2S22 sensor for proper operation, inspecting the wiring and connectors for any damage, and using a scan tool to monitor sensor voltage and heater operation.
5. Can I drive my 2004 Nissan Maxima with OBDII code P0058?
- It is not recommended to drive with this code as it can lead to poor engine performance and potential damage. It's best to address the issue promptly.
6. How can I repair OBDII code P0058 on my 2004 Nissan Maxima?
- Repair may involve replacing the HO2S22 sensor, repairing or replacing damaged wiring or connectors, or resetting the ECM after addressing the issue.
7. Are there any tips to prevent OBDII code P0058 on a 2004 Nissan Maxima?
- Regularly inspect and maintain the oxygen sensors, wiring, and connectors to prevent issues. Also, avoid driving in conditions that may cause damage to these components.
8. Can a DIY enthusiast fix OBDII code P0058 on a 2004 Nissan Maxima?
- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to address this code by following repair guides and using proper diagnostic equipment.
9. How much does it cost to repair OBDII code P0058 on a 2004 Nissan Maxima?
- The cost varies based on the specific issue causing the code, but it may range from $100 to $300 for parts and labor, with potential additional costs for diagnostic services.
10. Will resetting the Check Engine Light resolve OBDII code P0058 on a 2004 Nissan Maxima?
- Resetting the light may temporarily turn it off, but if the underlying issue causing the code is not addressed, the light is likely to come back on. It is important to diagnose and repair the problem to prevent further issues.
Discuss the causes and fixes for P0058 2004 Nissan Maxima OBDII Code
Code P0058 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
