P0058 2004 Nissan Altima Sedan Code - HO2S22 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 2004 Nissan Altima Sedan indicates HO2S22 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0058 2004 Nissan Altima Sedan Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0058 2004 Nissan Altima Sedan?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0058 2004 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0058 2004 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0058 2004 Nissan Altima Sedan code?
Need more information on how to fix the P0058 2004 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 2004 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 2004 Nissan Altima Sedan Code
1. What are common symptoms of OBDII code P0058 on a 2004 Nissan Altima Sedan?
- Common symptoms include poor fuel economy, rough idling, lack of power, and illuminated Check Engine Light.
2. What does the OBDII code P0058 for a 2004 Nissan Altima Sedan indicate?
- The code P0058 indicates a potential issue with the HO2S22 (Heated Oxygen Sensor Bank 2 Sensor 2) heater control circuit being too high.
3. What are the possible causes of OBDII code P0058 on a 2004 Nissan Altima Sedan?
- Possible causes include a faulty HO2S22 sensor, wiring or connector issues, a blown fuse, or a problem with the vehicle's PCM.
4. How can I diagnose the OBDII code P0058 on my 2004 Nissan Altima Sedan?
- Diagnose the code by checking the HO2S22 sensor's wiring and connector for any damage, testing the sensor's heater resistance, and inspecting the fuse related to the sensor.
5. Can I drive my 2004 Nissan Altima Sedan with the OBDII code P0058 active?
- It is not recommended to drive with the code active as it can lead to poor engine performance and potential damage to the catalytic converter.
6. How can I repair OBDII code P0058 on my 2004 Nissan Altima Sedan?
- To repair the code, you may need to replace the HO2S22 sensor, repair any damaged wiring or connectors, and ensure the fuse related to the sensor is in good condition.
7. Will resetting the Check Engine Light resolve the OBDII code P0058 on a 2004 Nissan Altima Sedan?
- Resetting the Check Engine Light may temporarily turn it off, but the code will return if the underlying issue causing P0058 is not addressed.
8. How much does it typically cost to repair OBDII code P0058 on a 2004 Nissan Altima Sedan?
- The cost of repair can vary depending on the root cause, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0058 on a 2004 Nissan Altima Sedan?
- If you have the necessary tools and knowledge, you may be able to replace the HO2S22 sensor or check the wiring yourself. However, complex issues may require professional assistance.
10. How often does OBDII code P0058 occur in 2004 Nissan Altima Sedans?
- OBDII code P0058 is not a common occurrence in 2004 Nissan Altima Sedans, but it can still happen due to various factors affecting the HO2S22 sensor.
Discuss the causes and fixes for P0058 2004 Nissan Altima Sedan OBDII Code
Code P0058 2004 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
