P0051 Dodge Code - O2 Sensor 2/1 Heater Circuit Low
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0051 Dodge indicates O2 Sensor 2/1 Heater Circuit Low.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0051 Dodge Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0051 Dodge?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0051 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0051 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0051 Dodge code?
Need more information on how to fix the P0051 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0051 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0051 Dodge Code
What does the OBDII code P0051 mean on a Dodge?
Code P0051 indicates an issue with the oxygen sensor (O2) heater circuit for Sensor 2, Bank 1, specifically a low voltage condition.
What are the symptoms of a P0051 code on a Dodge?
Symptoms may include an illuminated check engine light, poor fuel efficiency, rough idling, or increased emissions.
What causes the P0051 code on a Dodge?
Common causes include a faulty O2 sensor, damaged wiring or connectors, a blown fuse, or a malfunctioning powertrain control module (PCM).
How do I diagnose the P0051 code on my Dodge?
Inspect the O2 sensor wiring and connectors for damage, check the heater circuit's resistance, and test for proper voltage supply to the sensor.
Can a P0051 code cause drivability issues?
Yes, it can lead to poor engine performance, reduced fuel economy, and potentially higher emissions.
Is it safe to drive with a P0051 code on my Dodge?
While the car may still be drivable, ignoring the code could lead to further damage or increased fuel consumption.
How do I fix the P0051 code on my Dodge?
Repairs may include replacing the faulty O2 sensor, repairing damaged wiring, replacing a blown fuse, or addressing PCM issues.
How much does it cost to fix a P0051 code on a Dodge?
The cost varies but typically ranges from $100 to $300, depending on whether the sensor or wiring needs replacement.
Can a bad O2 sensor trigger the P0051 code?
Yes, a defective O2 sensor is one of the most common causes of this code.
Do I need a professional mechanic to fix the P0051 code?
While it’s possible to DIY if you have experience, professional diagnosis is recommended to avoid misdiagnosis or further issues.
Discuss the causes and fixes for P0051 Dodge OBDII Code
Code P0051 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
