P0051 2006 Nissan Maxima Code - Air Fuel Ratio Sensor 1 Heater Bank 2 Control Circuit Low
Quick Answer
Air-Fuel Ratio (A/F) sensor need to reach a minimum operating temperature of 1200 degrees F to produce an accurate voltage signal. Common causes include Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open shorted to ground, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0051 2006 Nissan Maxima indicates Air Fuel Ratio Sensor 1 Heater Bank 2 Control Circuit Low.
- Common causes
- Common causes include Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open shorted to ground, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0051 2006 Nissan Maxima Description
In order to achieve the require temperature, a heater element is included inside the air-fuel ratio sensor. The ECM controls the air-fuel ratio sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0051 2006 Nissan Maxima?
- Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1
- Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open shorted to ground
- Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection
- Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0051 2006 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0051 2006 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0051 2006 Nissan Maxima code?
Need more information on how to fix the P0051 2006 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0051 2006 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0051 2006 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0051 on a 2006 Nissan Maxima?
- Common symptoms include poor fuel economy, rough idling, and a noticeable decrease in engine performance.
2. What does the OBDII code P0051 for a 2006 Nissan Maxima indicate?
- The code P0051 indicates a malfunction in the Air Fuel Ratio Sensor 1 Heater Bank 2 Control Circuit, specifically a low voltage condition.
3. What are the possible causes of OBDII code P0051 on a 2006 Nissan Maxima?
- Possible causes include a faulty air fuel ratio sensor, damaged wiring or connectors, or a problem with the sensor's heater circuit.
4. How can I diagnose the OBDII code P0051 on my 2006 Nissan Maxima?
- You can diagnose the code by inspecting the sensor's wiring and connectors, testing the sensor itself, and checking the heater circuit for any faults.
5. Can I still drive my 2006 Nissan Maxima with OBDII code P0051?
- It is not recommended to drive your vehicle with this code as it can lead to decreased fuel efficiency and potential engine damage over time.
6. How do I repair OBDII code P0051 on a 2006 Nissan Maxima?
- To repair the code, you may need to replace the Air Fuel Ratio Sensor 1, repair any damaged wiring or connectors, and reset the fault code using an OBDII scanner.
7. Is it possible to clear the OBDII code P0051 on a 2006 Nissan Maxima without fixing the issue?
- Clearing the code without fixing the underlying issue may temporarily turn off the check engine light, but the problem will likely reappear until the root cause is addressed.
8. How much does it typically cost to repair OBDII code P0051 on a 2006 Nissan Maxima?
- The cost of repair can vary depending on the cause of the issue, but it may range from $200 to $500, including parts and labor.
9. Can a DIY enthusiast fix OBDII code P0051 on a 2006 Nissan Maxima?
- Depending on your skill level and access to tools, you may be able to replace the Air Fuel Ratio Sensor 1 yourself, but diagnosing and repairing wiring issues may require professional assistance.
10. How often does OBDII code P0051 occur in 2006 Nissan Maximas?
- While not extremely common, OBDII code P0051 can occur in 2006 Nissan Maximas due to the age of the vehicle and normal wear and tear on components.
Discuss the causes and fixes for P0051 2006 Nissan Maxima OBDII Code
Code P0051 2006 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
