AutoCodes.com
Login with Google
AutoCodes – Ford – P0040 Ford

P0040 Ford Code - Oxygen Sensor Signal Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1

Quick Answer

The Heated Oxygen Sensor (HO2S) monitor determines if the Universal HO2S signal response for a fuel shift corresponds to the correct engine bank. Common causes include Crossed Universal HO2S harness connectors, Crossed Universal HO2S wiring at the harness connectors, Crossed Universal HO2S wiring at the Powertrain Control Module (PCM) connectors. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0040 Ford indicates Oxygen Sensor Signal Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1.
Common causes
Common causes include Crossed Universal HO2S harness connectors, Crossed Universal HO2S wiring at the harness connectors, Crossed Universal HO2S wiring at the Powertrain Control Module (PCM) connectors.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 13,407
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0040 Ford Description

The Heated Oxygen Sensor (HO2S) monitor determines if the Universal HO2S signal response for a fuel shift corresponds to the correct engine bank. This Diagnostic Trouble Code (DTC) is set when there is no response from the Universal HO2S being tested.
OBDII Code P0040 Ford - Oxygen Sensor Signal Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1 - AutoCodes.com
P0040 Ford Code - Oxygen Sensor Signal Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1
What does this mean?

What are the Possible Causes of the DTC P0040 Ford?

  • Crossed Universal HO2S harness connectors
  • Crossed Universal HO2S wiring at the harness connectors
  • Crossed Universal HO2S wiring at the Powertrain Control Module (PCM) connectors

How to Fix the DTC P0040 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0040 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0040 Ford code?

Need more information on how to fix the P0040 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0040 Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0040 Ford Code

No Frequently Asked Questions about P0040 Ford Code found.

Discuss the causes and fixes for P0040 Ford OBDII Code

Submit a New Comment

Code P0040 Ford comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play