P0038 2005 Nissan Maxima Code - HO2S12 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0038 2005 Nissan Maxima indicates HO2S12 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0038 2005 Nissan Maxima Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0038 2005 Nissan Maxima?
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0038 2005 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0038 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0038 2005 Nissan Maxima code?
Need more information on how to fix the P0038 2005 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0038 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0038 2005 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0038 on a 2005 Nissan Maxima?
- Common symptoms include poor fuel economy, rough idling, stalling, and the illumination of the Check Engine Light.
2. What does the OBDII code P0038 on a 2005 Nissan Maxima indicate?
- The code P0038 indicates a problem with the HO2S12 (Heated Oxygen Sensor Bank 1 Sensor 2) heater control circuit being too high.
3. What are the possible causes of OBDII code P0038 on a 2005 Nissan Maxima?
- Possible causes include a faulty HO2S12 sensor, damaged wiring or connectors in the heater circuit, or a malfunctioning ECM (Engine Control Module).
4. How can I diagnose the issue causing OBDII code P0038 on my 2005 Nissan Maxima?
- You can use a multimeter to test the resistance of the HO2S12 sensor, inspect the wiring and connectors for damage, and perform a scan tool test to check the heater circuit operation.
5. What are the repair options for fixing OBDII code P0038 on a 2005 Nissan Maxima?
- Repair options include replacing the faulty HO2S12 sensor, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.
6. Can I drive my 2005 Nissan Maxima with OBDII code P0038 without causing further damage?
- It is not recommended to drive your vehicle with code P0038 as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.
7. How much does it typically cost to repair OBDII code P0038 on a 2005 Nissan Maxima?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $150 to $400 for parts and labor.
8. Is it possible to reset the Check Engine Light after repairing OBDII code P0038 on a 2005 Nissan Maxima?
- Yes, once the issue causing the code has been resolved, you can reset the Check Engine Light using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
9. Are there any preventative maintenance measures to avoid OBDII code P0038 on a 2005 Nissan Maxima?
- Regularly inspecting and maintaining the oxygen sensors, wiring, and connectors can help prevent issues that may trigger code P0038.
10. How long does it take to repair OBDII code P0038 on a 2005 Nissan Maxima?
- The repair time can vary based on the exact cause of the issue and the availability of parts, but it typically takes 1-2 hours to complete the repair.
Discuss the causes and fixes for P0038 2005 Nissan Maxima OBDII Code
Code P0038 2005 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
