P0034 Buick Code - Turbocharger Bypass Solenoid Valve Control Circuit Low Voltage
Quick Answer
The dual scroll turbocharger incorporates a wastegate that is controlled by a pressure differential, which is determined by the Engine Control Module (ECM) using a PWM solenoid, to regulate the pressure ratio of the compressor. Common causes include Faulty Turbocharger Bypass Solenoid Valve, Turbocharger Bypass Solenoid Valve harness is open or shorted, Turbocharger Bypass Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0034 Buick indicates Turbocharger Bypass Solenoid Valve Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Turbocharger Bypass Solenoid Valve, Turbocharger Bypass Solenoid Valve harness is open or shorted, Turbocharger Bypass Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0034 Buick Description
As engine load and RPM increase the turbocharger bypass solenoid parameter should remain commanded ON by the ECM. As soon as the throttle closes the turbocharger bypass solenoid parameter should be commanded OFF by the ECM, to allow the turbocharger bypass valve to open and allow the turbocharger air to recirculate, thereby preventing compressor surging.
What are the Possible Causes of the DTC P0034 Buick?
- Faulty Turbocharger Bypass Solenoid Valve
- Turbocharger Bypass Solenoid Valve harness is open or shorted
- Turbocharger Bypass Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0034 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0034 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0034 Buick code?
Need more information on how to fix the P0034 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0034 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0034 Buick Code
No Frequently Asked Questions about P0034 Buick Code found.
Discuss the causes and fixes for P0034 Buick OBDII Code
Code P0034 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.