P0032 Subaru Code - HO2S11 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0032 Subaru indicates HO2S11 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0032 Subaru Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0032 Subaru?
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0032 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0032 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0032 Subaru code?
Need more information on how to fix the P0032 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0032 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0032 Subaru Code
1. What does OBDII code P0032 on a Subaru mean?
The code P0032 indicates a problem with the HO2S11 (Heated Oxygen Sensor 1) heater control circuit on a Subaru vehicle.
2. What are some common symptoms of OBDII code P0032 in a Subaru?
Common symptoms of code P0032 may include poor fuel economy, rough idling, hesitation during acceleration, and an illuminated check engine light.
3. What causes the HO2S11 heater control circuit high error code in a Subaru?
Possible causes of the P0032 code in a Subaru include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module (ECM).
4. How can I diagnose the P0032 code on my Subaru?
Diagnosing the P0032 code involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring for any visible damage, and testing the sensor's heater circuit for continuity.
5. Can I drive my Subaru with the P0032 code?
It is not recommended to drive a Subaru with the P0032 code unresolved, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. How do I repair the HO2S11 heater control circuit high issue in my Subaru?
Repairing the P0032 code typically involves replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, checking and replacing fuses if necessary, and clearing the error code.
7. Are there any DIY tips for fixing the P0032 code on a Subaru?
While some aspects of diagnosing and repairing the P0032 code can be done by DIY enthusiasts, it is recommended to seek professional help for accurate diagnosis and proper repair to avoid potential complications.
8. How much does it cost to fix the P0032 code on a Subaru?
The cost of fixing the P0032 code on a Subaru can vary depending on the root cause of the issue, the labor rates in your area, and whether you choose to address the problem yourself or take it to a dealership or mechanic.
9. Can a P0032 code in a Subaru be a recurring issue?
If the underlying cause of the P0032 code is not properly addressed, it is possible for the code to reoccur. Regular maintenance and addressing any related issues promptly can help prevent the code from coming back.
10. Is it safe to clear the P0032 code on a Subaru without fixing the underlying issue?
Clearing the P0032 code without fixing the underlying problem is not recommended, as it may temporarily turn off the check engine light but will not address the root cause of the issue, potentially leading to further problems down the line.
Discuss the causes and fixes for P0032 Subaru OBDII Code
Code P0032 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
