P0032 Infiniti Code - HO2S11 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0032 Infiniti indicates HO2S11 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0032 Infiniti Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0032 Infiniti?
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0032 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0032 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0032 Infiniti code?
Need more information on how to fix the P0032 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0032 Infiniti code diagnosed by a professional: Find a repair shop in your area
Information for Specific Infiniti Models
- P0032 2003 Infiniti G35 — HO2S11 Heater Control Circuit High
- P0032 2004 Infiniti G35 — HO2S11 Heater Control Circuit High
- P0032 2005 Infiniti G35 — Air Fuel Ratio Sensor 1 Heater Bank 1 Control Circuit High
- P0032 2006 Infiniti G35 — Air Fuel Ratio Sensor 1 Heater Bank 1 Control Circuit High
Frequently Asked Questions about P0032 Infiniti Code
1. What does the OBDII code P0032 mean on an Infiniti?
P0032 indicates that the Heated Oxygen Sensor (HO2S) for Bank 1, Sensor 1 has a heater control circuit with a voltage that is too high.
2. What are the common symptoms of code P0032 on an Infiniti?
Symptoms may include a check engine light, increased fuel consumption, rough idling, poor engine performance, or difficulty passing emissions tests.
3. What causes the P0032 code on an Infiniti?
Common causes include a faulty oxygen sensor, a shorted or damaged wiring harness, a malfunctioning PCM, or a blown fuse in the oxygen sensor heater circuit.
4. Which sensor is affected by the P0032 code?
The code refers to the Bank 1, Sensor 1 oxygen sensor, which is the upstream sensor located before the catalytic converter on the side of the engine with cylinder 1.
5. Can I drive my Infiniti with a P0032 code?
Driving with this code is possible but not recommended, as it may result in poor fuel efficiency, higher emissions, and potential long-term damage to the catalytic converter.
6. How do I diagnose the P0032 code on my Infiniti?
Start by inspecting the oxygen sensor wiring and connectors for damage, check the fuse for the sensor heater circuit, and test the resistance of the heater element in the sensor using a multimeter.
7. How do I fix the P0032 code on my Infiniti?
Repairs may include replacing the faulty oxygen sensor, repairing damaged wiring or connectors, replacing a blown fuse, or reprogramming or replacing the PCM if necessary.
8. How much does it cost to fix code P0032 on an Infiniti?
The cost can range from $100 to $300 for a replacement oxygen sensor, plus labor, or more if additional issues such as wiring repairs or PCM replacement are required.
9. Can a bad oxygen sensor cause P0032 on an Infiniti?
Yes, a malfunctioning oxygen sensor is one of the most common causes of the P0032 code.
10. Will clearing the code fix P0032 on my Infiniti?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0032 Infiniti OBDII Code
Code P0032 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
