AutoCodes – Ford – P0028 Ford

P0028 Ford Code - Intake valve Control Solenoid Circuit Range/Performance Bank 2

Quick Answer

The Continuously Variable Valve Timing (CVVT) system is installed to the chain sprocket of the intake camshaft. Common causes include Dirty engine oil, Low engine oil level, Faulty intake valve control solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0028 Ford indicates Intake valve Control Solenoid Circuit Range/Performance Bank 2.
Common causes: Common causes include Dirty engine oil, Low engine oil level, Faulty intake valve control solenoid.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 376

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 31, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0028 Ford Description

The Continuously Variable Valve Timing (CVVT) system is installed to the chain sprocket of the intake camshaft. This system controls the intake camshaft to provide the optimal valve timing. The Engine Control Module (ECM) controls the Oil Control Valve(OCV), based on the signals output from mass air flow, throttle position and engine coolant temperature. The CVVT controller regulates the intake camshaft angle using oil pressure through the OCV. As result, the relative position between the camshaft and the crankshaft becomes optimal, and the engine torque improves, fuel economy improves, exhaust emissions decrease under overall driving conditions.

OBDII Code P0028 Ford - Intake valve Control Solenoid Circuit Range/Performance Bank 2 - AutoCodes.com — P0028 Ford Code - Intake valve Control Solenoid Circuit Range/Performance Bank 2

What does this mean?

What are the Possible Causes of the DTC P0028 Ford?

Dirty engine oil
Low engine oil level
Faulty intake valve control solenoid
Intake valve control solenoid harness is open or shorted
Intake valve control solenoid circuit poor electrical connection

How to Fix the DTC P0028 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0028 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0028 Ford code?

Need more information on how to fix the P0028 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0028 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0028 Ford Code

What does the OBDII code P0028 mean for a Ford vehicle?

P0028 indicates an issue with the Intake Valve Control Solenoid Circuit Range/Performance on Bank 2, meaning the solenoid may not be functioning properly or is out of its expected range.

What are the common symptoms of code P0028 in a Ford vehicle?

Symptoms include rough idling, poor engine performance, reduced fuel efficiency, and possibly an illuminated Check Engine Light.

What causes the P0028 code on a Ford vehicle?

Common causes include a faulty intake valve control solenoid, wiring issues, low oil levels, dirty or degraded engine oil, or a malfunctioning PCM.

How can low oil levels cause the P0028 code in a Ford?

Low oil levels can reduce hydraulic pressure, preventing proper operation of the intake valve control solenoid and triggering the code.

How do you diagnose the P0028 code on a Ford vehicle?

Start by scanning for codes, inspecting the intake valve control solenoid, checking oil levels and quality, and visually inspecting the wiring and connectors for damage.

Can a dirty oil filter contribute to the P0028 code?

Yes, a clogged or dirty oil filter can restrict oil flow to the intake valve control solenoid, causing range or performance issues.

How can you fix the P0028 code on a Ford vehicle?

Repairs may involve replacing a faulty intake valve control solenoid, repairing damaged wiring, replenishing or changing the oil, or updating/reprogramming the PCM.

Is it safe to drive with a P0028 code on a Ford vehicle?

While the vehicle may still run, driving with this code can lead to poor performance and potential engine damage if the issue is not resolved.

What tools are needed to troubleshoot the P0028 code on a Ford?

Essential tools include an OBDII scanner, multimeter, and basic hand tools for inspecting and replacing components.

Can a PCM issue cause the P0028 code?

Yes, a malfunctioning Powertrain Control Module (PCM) can fail to properly control the intake valve solenoid, triggering the code.

Discuss the causes and fixes for P0028 Ford OBDII Code

Submit a New Comment

Code P0028 Ford comments

No comments found for this page.

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.