P0023 Suzuki Code - Exhaust Camshaft Position Actuator Solenoid Control Circuit Bank 2
Quick Answer
The Camshaft Position (CMP) Actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Faulty Exhaust Camshaft Position Actuator Solenoid, Exhaust Camshaft Position Actuator Solenoid harness is open or shorted, Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0023 Suzuki indicates Exhaust Camshaft Position Actuator Solenoid Control Circuit Bank 2.
- Common causes
- Common causes include Faulty Exhaust Camshaft Position Actuator Solenoid, Exhaust Camshaft Position Actuator Solenoid harness is open or shorted, Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0023 Suzuki Description
Ignition voltage is supplied directly to the CMP actuator solenoid. The ECM controls the solenoid by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled-up to a voltage. The ECM can determine if the control circuit is open, shorted to ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will set if the ECM detects an open in the CMP actuator solenoid circuits for more than 4 seconds or a cumulative of 50 seconds, when the solenoid is commanded OFF.
What are the Possible Causes of the DTC P0023 Suzuki?
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0023 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0023 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0023 Suzuki code?
Need more information on how to fix the P0023 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0023 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0023 Suzuki Code
1. What are the common symptoms of OBDII code P0023 in a Suzuki?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and the Check Engine light being illuminated.
2. What does the OBDII code P0023 in a Suzuki indicate?
- This code indicates a problem with the exhaust camshaft position actuator solenoid control circuit in Bank 2 of the engine.
3. What are the possible causes of OBDII code P0023 in a Suzuki?
- Possible causes include a faulty camshaft position actuator solenoid, wiring issues, low oil levels, oil flow problems, or a malfunctioning engine control module.
4. Can driving with OBDII code P0023 in a Suzuki cause further damage?
- Continuing to drive with this code can potentially lead to engine damage, decreased performance, and more severe issues over time, so it is best to address the problem promptly.
5. How can I diagnose and repair OBDII code P0023 in my Suzuki?
- Diagnosis typically involves inspecting the camshaft position actuator solenoid, checking the wiring connections, and testing oil levels and flow. Repair may involve replacing the faulty components and clearing the code.
6. Can I fix OBDII code P0023 in a Suzuki by simply clearing the code?
- Clearing the code may temporarily turn off the Check Engine light, but it will not fix the underlying issue causing the code. It is essential to diagnose and repair the problem to prevent further complications.
7. How much does it typically cost to repair OBDII code P0023 in a Suzuki?
- The cost of repairing this code can vary depending on the specific cause and the labor rates of the repair shop. It is advisable to get a professional diagnosis to determine the exact repair cost.
8. Are there any preventive maintenance tips to avoid OBDII code P0023 in a Suzuki?
- Regularly changing the engine oil and following the manufacturer's maintenance schedule can help prevent issues like OBDII code P0023 by ensuring proper lubrication and functioning of engine components.
9. Can a DIY enthusiast without much experience fix OBDII code P0023 in a Suzuki?
- While some simple checks like inspecting wiring connections can be done by DIY enthusiasts, diagnosing and repairing this code often requires specialized tools and expertise, so it is recommended to consult a professional mechanic.
10. How urgent is it to address OBDII code P0023 in a Suzuki?
- It is advisable to address this code promptly to prevent potential engine damage and performance issues. Ignoring the problem can lead to more costly repairs down the line.
Discuss the causes and fixes for P0023 Suzuki OBDII Code
Code P0023 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
