P0022 Hyundai Code - 'A' Camshaft Position- Timing Over-Retarded Or System Performance- Bank 2
Quick Answer
The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0022 Hyundai indicates 'A' Camshaft Position- Timing Over-Retarded Or System Performance- Bank 2.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0022 Hyundai Description
The deviation of the camshaft position from the target point is evaluated during stable driving condition. The Engine Control Module (ECM) accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM.
What are the Possible Causes of the DTC P0022 Hyundai?
- Dirty Oil
- Low engine oil level
- Faulty Valve Timing Control (VTC)
- Valve Timing Control (VTC) harness is open or shorted circuit.
- Valve Timing Control (VTC) circuit poor electrical connector
- Incorrect timing
- Engine mechanical problems
- Damaged Engine Control Module (ECM)
How to Fix the DTC P0022 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Hyundai Accent (MC)
Hyundai 2003-2006 SULEV Elantra (XD)
Hyundai 2004-2008 Tiburon 2.0L (GK)
Hyundai Tucson 2.0L (JM)
Hyundai Elantra (HD)
Hyundai Elantra Touring (FD)
Hyundai Genesis Coupe (BK)
Hyundai Sonata (NF)
Hyundai Santa Fe
Hyundai Sonata (NF)
Hyundai Santa Fe (CM)
Hyundai Azera (TG)
Hyundai Veracruz (EN)
Hyundai Entourage (EP),
Hyundai Genesis Coupe (BK)
Hyundai Genesis Sedan (BH)Genesis Sedan (BH)
The bulletin provides information on how to inspect and diagnose problems related to the Oil Control Valve (OCV) used in Constant Variable Valve Timing (CVVT), if at any time the OCV is suspected as the caused of rough idling, poor acceleration, camshaft timing misalignment-related trouble codes, misfire-related trouble codes.
Factory Service Bulletin: Hyundai Constant Variable Valve Timing Oil Control Valve Inspection OBDII Code P0022
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0022 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0022 Hyundai code?
Need more information on how to fix the P0022 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0022 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0022 Hyundai Code
What does the OBDII code P0022 mean for a Hyundai?
P0022 indicates that the 'A' camshaft on Bank 2 has a timing issue, specifically being over-retarded or delayed beyond the expected range.
What are common symptoms of code P0022 in a Hyundai?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, engine stalling, or the Check Engine Light turning on.
What causes the P0022 code in a Hyundai?
Common causes include a malfunctioning Variable Valve Timing (VVT) solenoid, dirty or low engine oil, a stretched timing chain, or issues with the camshaft position sensor.
Can driving with a P0022 code damage my Hyundai engine?
Yes, prolonged driving with this code can lead to engine performance issues and potential internal damage if the timing problem is not resolved.
How can I diagnose the P0022 code on my Hyundai?
Diagnosis involves checking engine oil levels and condition, inspecting the VVT solenoid and wiring, and using a scan tool to monitor camshaft timing.
Can low oil cause the P0022 code on a Hyundai?
Yes, low or dirty oil can affect the VVT system, leading to timing problems and triggering the P0022 code.
What is the most common fix for a P0022 code in a Hyundai?
The most common fix is replacing a faulty VVT solenoid or camshaft position sensor, though an oil change may also resolve the issue.
How much does it cost to repair a P0022 code on a Hyundai?
Repair costs can range from $150 to $500 or more, depending on whether parts like the VVT solenoid, timing chain, or sensors need replacement.
Can a bad timing chain cause a P0022 code in a Hyundai?
Yes, a stretched or worn timing chain can disrupt camshaft timing and trigger the P0022 code.
What tools are needed to fix the P0022 code in a Hyundai?
Basic tools include a scan tool for diagnostics, wrenches, a multimeter for electrical testing, and potentially specialized tools for timing chain adjustments.
Discuss the causes and fixes for P0022 Hyundai OBDII Code
Code P0022 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
