AutoCodes – Ford – P0020 2012 Ford Fusion

P0020 2012 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 2

Quick Answer

The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) circuit to the PCM for high and low voltage. Common causes include Faulty Variable Camshaft Timing (VCT) Solenoid Valve, Variable Camshaft Timing Solenoid Valve circuit is open or shorted, Variable Camshaft Timing Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0020 2012 Ford Fusion indicates Intake Camshaft Position Actuator Circuit Open Bank 2.
Common causes: Common causes include Faulty Variable Camshaft Timing (VCT) Solenoid Valve, Variable Camshaft Timing Solenoid Valve circuit is open or shorted, Variable Camshaft Timing Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,995

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 01, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0020 2012 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) circuit to the PCM for high and low voltage. The Diagnostic Trouble Code (DTC) will set if the voltage exceeds or falls below a calibrated limit for a calibrated amount of time.

OBDII Code P0020 2012 Ford Fusion - Intake Camshaft Position Actuator Circuit Open Bank 2 - AutoCodes.com — P0020 2012 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 2

What does this mean?

What are the Possible Causes of the DTC P0020 2012 Ford Fusion?

Faulty Variable Camshaft Timing (VCT) Solenoid Valve
Variable Camshaft Timing Solenoid Valve circuit is open or shorted
Variable Camshaft Timing Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0020 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0020 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0020 2012 Ford Fusion code?

Need more information on how to fix the P0020 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0020 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0020 2012 Ford Fusion Code

1. What does the OBDII code P0020 on a 2012 Ford Fusion indicate?

The code P0020 indicates an issue with the Intake Camshaft Position Actuator Circuit Open Bank 2.

2. What are the common symptoms of a P0020 code on a 2012 Ford Fusion?

Common symptoms may include engine misfires, rough idling, poor acceleration, and a decrease in fuel efficiency.

3. What are the possible causes of the P0020 code on a 2012 Ford Fusion?

Possible causes include a faulty camshaft position actuator, wiring issues in the circuit, low engine oil level or pressure, or a malfunctioning engine control module (ECM).

4. How do I diagnose the P0020 code on my 2012 Ford Fusion?

Diagnosis typically involves checking the camshaft position actuator for proper operation, inspecting the wiring for damage or loose connections, and verifying the engine oil level and pressure.

5. Can I drive my 2012 Ford Fusion with a P0020 code?

It is not recommended to drive your vehicle with a P0020 code as it can lead to further engine damage and performance issues.

6. How can I repair the P0020 code on my 2012 Ford Fusion?

Repair options include replacing the faulty camshaft position actuator, repairing or replacing damaged wiring, ensuring proper engine oil levels, and addressing any ECM issues.

7. Is it possible to reset the P0020 code on a 2012 Ford Fusion?

While you can clear the code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.

8. Can a DIY enthusiast fix the P0020 code on a 2012 Ford Fusion?

Depending on your mechanical skills and tools available, some DIY enthusiasts may be able to address the P0020 code, but it is recommended to consult a professional for accurate diagnosis and repair.

9. Will the P0020 code cause my 2012 Ford Fusion to fail an emissions test?

Yes, the P0020 code can cause your vehicle to fail an emissions test due to the impact on engine performance and emissions control systems.

10. How much can repairs for the P0020 code on a 2012 Ford Fusion cost?

The repair costs for a P0020 code can vary depending on the root cause of the issue, but it is advisable to budget for potential expenses related to camshaft actuator replacement, wiring repairs, or ECM diagnostics.