P0018 KIA Code - Crankshaft Position-Camshaft Position Correction- Bank 2 Sensor 'A'
Quick Answer
The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0018 KIA indicates Crankshaft Position-Camshaft Position Correction- Bank 2 Sensor 'A'.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Valve Timing Control (VTC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0018 KIA Description
The deviation of the camshaft position from the target point is evaluated during stable driving condition. The Engine Control Module (ECM) accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM.
What are the Possible Causes of the DTC P0018 KIA?
- Dirty Oil
- Low engine oil level
- Faulty Valve Timing Control (VTC)
- Valve Timing Control (VTC) harness is open or shorted circuit.
- Valve Timing Control (VTC) circuit poor electrical connector
- Incorrect timing
- Engine mechanical problems
- Damaged Engine Control Module (ECM)
How to Fix the DTC P0018 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Kia Rio (JB)
Kia Soul (AM)
Kia Optima (MG)
Kia Rondo (UN)
Kia Forte (TD)
Kia Spectra (LD)
Kia Sportage (KM)
Kia Optima (MG)
Kia Sedona (VQ)
Kia Amanti (GH)
Kia Borrego (HM)
Kia Sedona (VQ)
Kia Sorento (BL)
Kia Borrego (HM)
The bulletin provides information on how to inspect and diagnose problems related to the Oil Control Valve (OCV) used in Constant Variable Valve Timing (CVVT), if at any time the OCV is suspected as the caused of rough idling, poor acceleration, camshaft timing misalignment-related trouble codes, misfire-related trouble codes.
Factory Service Bulletin: Kia Constant Variable Valve Timing Oil Control Valve Inspection OBDII Code P0018
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0018 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0018 KIA code?
Need more information on how to fix the P0018 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0018 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0018 KIA Code
1. What are the common symptoms of OBDII code P0018 on a KIA related to the Crankshaft Position-Camshaft Position Correction for Bank 2 Sensor 'A'?
- Common symptoms include rough idling, engine misfires, poor acceleration, and potentially stalling.
2. What are the possible causes of OBDII code P0018 on a KIA?
- Possible causes may include a faulty camshaft position sensor, damaged wiring or connectors, timing chain or belt issues, or engine mechanical problems.
3. How can I diagnose the root cause of OBDII code P0018 on my KIA?
- A proper diagnosis involves using a scan tool to check for the code, inspecting the camshaft position sensor and related components, and performing a thorough engine timing check.
4. Can driving with OBDII code P0018 on a KIA cause further damage?
- Continuing to drive with this code can potentially lead to more severe engine issues, so it is recommended to address the problem promptly.
5. How can I repair OBDII code P0018 on a KIA?
- Repairing this code may involve replacing the camshaft position sensor, repairing damaged wiring, adjusting engine timing, or addressing any mechanical issues causing the code.
6. Is it safe to ignore OBDII code P0018 on a KIA?
- Ignoring this code can result in poor engine performance, reduced fuel efficiency, and further damage over time, so it's best to address it promptly.
7. Are there any maintenance tips to prevent OBDII code P0018 on a KIA?
- Regularly maintaining your vehicle, including timely oil changes and following the manufacturer's recommended service intervals, can help prevent issues that trigger this code.
8. Can a DIY enthusiast fix OBDII code P0018 on a KIA?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address this code themselves by following repair guides or seeking assistance from experienced mechanics.
9. How much does it typically cost to repair OBDII code P0018 on a KIA at a repair shop?
- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Does resetting the OBDII code P0018 on a KIA temporarily solve the issue?
- Resetting the code without addressing the underlying problem is not a permanent solution and may lead to the code reappearing once the issue persists.
Discuss the causes and fixes for P0018 KIA OBDII Code
-
code p10018 is on my 2008 kia sodona vehicle runs like a new car but I must clear code for emmissions
-
what should replacei changed the oil & filter had wrong filter put oem filter new oil drove 100 miles code is back
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
