P0018 2020 Ford F150 Code - Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'A'
Quick Answer
This Diagnostic Trouble Code (DTC) is set when the Powertrain Control Module (PCM) a misalignment between the camshaft and crankshaft is detected. Common causes include Variable Camshaft Timing (VCT) unit to camshaft alignment, Excessive camshaft timing chain wear, Camshaft timing incorrectly set. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0018 2020 Ford F150 indicates Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'A'.
- Common causes
- Common causes include Variable Camshaft Timing (VCT) unit to camshaft alignment, Excessive camshaft timing chain wear, Camshaft timing incorrectly set.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0018 2020 Ford F150 Description
What are the Possible Causes of the DTC P0018 2020 Ford F150?
- Variable Camshaft Timing (VCT) unit to camshaft alignment
- Excessive camshaft timing chain wear
- Camshaft timing incorrectly set
- Continuous oil flow to the VCT piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- Faulty Variable Camshaft Timing (VCT) Bank 2 Solenoid 1 (VCT21)
- Faulty Camshaft Position (CMP) Bank 2 Sensor 1 (CMP21)
- Variable Camshaft Timing Bank 2 Solenoid 1 circuit is open or shorted
- Variable Camshaft Timing Bank 2 Solenoid 1 circuit poor electrical connection
- Camshaft Position Bank 2 Sensor 1 circuit is open or shorted
- Camshaft Position Bank 2 Sensor 1 circuit poor electrical connection
- Faulty Variable Camshaft Timing Phaser
How to Fix the DTC P0018 2020 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0018 2020 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0018 2020 Ford F150 code?
Need more information on how to fix the P0018 2020 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0018 2020 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0018 2020 Ford F150 Code
1. What are the common symptoms of OBDII code P0018 on a 2020 Ford F150?
- Common symptoms include rough idling, engine misfires, poor acceleration, and illuminated Check Engine Light.
2. What does the OBDII code P0018 indicate in a 2020 Ford F150?
- OBDII code P0018 indicates a problem with the correlation between the crankshaft position sensor and the camshaft position sensor on Bank 2 Sensor 'A'.
3. What are the possible causes of OBDII code P0018 on a 2020 Ford F150?
- Possible causes include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain or belt issues, engine oil problems, or wiring/connectivity issues.
4. How can I diagnose the OBDII code P0018 on my 2020 Ford F150?
- Diagnosis may involve checking the condition of the sensors, inspecting the timing components, verifying oil levels and quality, and conducting a thorough visual inspection of wiring and connectors.
5. Can I drive my 2020 Ford F150 with OBDII code P0018?
- It is not recommended to drive with OBDII code P0018 as it can lead to further engine damage and potential safety hazards. Immediate attention is advised.
6. How can I repair OBDII code P0018 on my 2020 Ford F150?
- Repair may involve replacing the camshaft position sensor, crankshaft position sensor, addressing timing issues, ensuring proper engine oil levels, and fixing any wiring problems.
7. Will resetting the Check Engine Light fix OBDII code P0018 on a 2020 Ford F150?
- Simply resetting the Check Engine Light will not fix the underlying issue causing OBDII code P0018. Proper diagnosis and repair are necessary.
8. How much does it cost to repair OBDII code P0018 on a 2020 Ford F150?
- The cost of repair can vary depending on the specific cause of the code. It is recommended to consult a mechanic for an accurate diagnosis and cost estimate.
9. Can a DIY enthusiast fix OBDII code P0018 on a 2020 Ford F150?
- While some aspects of the repair may be DIY-friendly, proper diagnosis and repair of OBDII code P0018 often require specialized tools and expertise. Consulting a professional is recommended.
10. How often does OBDII code P0018 occur in a 2020 Ford F150?
- OBDII code P0018 may occur infrequently in a 2020 Ford F150, but prompt attention is crucial to prevent potential engine damage and ensure safe driving.
Discuss the causes and fixes for P0018 2020 Ford F150 OBDII Code
Code P0018 2020 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
