P0018 2007 Ford Fusion Code - Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'A'
Quick Answer
The Powertrain Control Module (PCM) monitors the variable camshaft timing (VCT) position for a misalignment between the camshaft and crankshaft. Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0018 2007 Ford Fusion indicates Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'A'.
- Common causes
- Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0018 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0018 2007 Ford Fusion?
- Camshaft timing incorrectly set
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid stuck in position
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0018 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0018 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0018 2007 Ford Fusion code?
Need more information on how to fix the P0018 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0018 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0018 2007 Ford Fusion Code
1. What does OBDII code P0018 for a 2007 Ford Fusion mean?
The code P0018 indicates a problem with the Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'A'.
2. What are the common symptoms of OBDII code P0018 in a 2007 Ford Fusion?
Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and potentially stalling.
3. What are the possible causes of OBDII code P0018 in a 2007 Ford Fusion?
Possible causes include a faulty camshaft position sensor, issues with the timing belt or chain, improper oil levels or quality, and problems with the engine control module.
4. How can I diagnose the OBDII code P0018 in my 2007 Ford Fusion?
Diagnosis typically involves using a scan tool to check for the specific code, inspecting the camshaft position sensor and related components, and testing the timing belt or chain.
5. Can I still drive my 2007 Ford Fusion with OBDII code P0018?
It is not recommended to drive the vehicle with code P0018, as it can lead to further engine damage and potential safety hazards.
6. How can I repair OBDII code P0018 in a 2007 Ford Fusion?
Repair options may include replacing the camshaft position sensor, addressing any timing belt or chain issues, ensuring proper oil levels, and resetting the engine control module.
7. Are there any DIY tips for fixing OBDII code P0018 in a 2007 Ford Fusion?
While some basic troubleshooting steps can be done at home, it is best to consult a professional mechanic for accurate diagnosis and repair of code P0018.
8. How much does it cost to fix OBDII code P0018 in a 2007 Ford Fusion?
The cost of repairs for code P0018 can vary depending on the extent of the issue, the parts needed, and the labor rates of the repair shop.
9. Can neglecting OBDII code P0018 lead to more serious engine problems in a 2007 Ford Fusion?
Yes, neglecting code P0018 can potentially cause severe engine damage over time, leading to costly repairs or even engine failure.
10. Is it necessary to clear the OBDII code P0018 after repairing a 2007 Ford Fusion?
Yes, it is important to clear the code after making the necessary repairs to ensure the issue has been resolved and to prevent the Check Engine light from coming back on.
Discuss the causes and fixes for P0018 2007 Ford Fusion OBDII Code
Code P0018 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
