AutoCodes – Pontiac – P0017 Pontiac

P0017 Pontiac Code - Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'

Quick Answer

The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. Common causes include Mechanical timing fault (stretched timing chain or damage timing chain tensioner), Blocked oil passage, Low oil level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0017 Pontiac indicates Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'.
Common causes: Common causes include Mechanical timing fault (stretched timing chain or damage timing chain tensioner), Blocked oil passage, Low oil level.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,125

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 28, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0017 Pontiac Description

The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. The magnetic field of the sensor is altered by a crankshaft mounted reluctor wheel that has seven machined slots, 6 of which are equally spaced 60 degrees apart. The seventh slot is spaced 10 degrees after one of the 60 degree slots. The CKP sensor produces seven pulses for each revolution of the crankshaft. The pulse from the 10 degree slot is known as the sync pulse. The sync pulse is used to synchronize the coil firing sequence with the crankshaft position. The CKP sensor is connected to the Powertrain Control Module (PCM) by a signal circuit and a low reference circuit.
The Camshaft Position (CMP) sensor is triggered by a notched reluctor wheel built into the exhaust camshaft sprocket. The CMP sensor provides 6 signal pulses every camshaft revolution. Each notch, or feature of the reluctor wheel is of a different size for individual cylinder identification. This means the CMP and crankshaft position (CKP) signals are pulse width encoded to enable the PCM to constantly monitor their relationship. This relationship is used to determine camshaft actuator position and control its phasing at the correct value. The PCM also uses this signal to identify the compression stroke of each cylinder, and for sequential fuel injection. The CMP sensor is connected to the PCM by a 12-volt, low reference, and signal circuit.

OBDII Code P0017 Pontiac - Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B' - AutoCodes.com — P0017 Pontiac Code - Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'

What does this mean?

What are the Possible Causes of the DTC P0017 Pontiac?

Mechanical timing fault (stretched timing chain or damage timing chain tensioner)
Blocked oil passage
Low oil level
Faulty Intake ('B') Camshaft Position (CMP) Sensor
Faulty Crankshaft Position (CKP) Sensor

How to Fix the DTC P0017 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the following Pontiac models:
2007-2010 Pontiac G6
2008-2009 Pontiac G8
2008-2009 Pontiac Torrent
Pontiac Factory Service Bulletin OBDII Code P0017

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0017 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0017 Pontiac code?

Need more information on how to fix the P0017 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0017 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0017 Pontiac Code

1. What are the common symptoms of OBDII code P0017 in a Pontiac?

- Common symptoms include engine misfires, rough idling, poor acceleration, stalling, and a decrease in fuel efficiency.

2. What does the OBDII code P0017 in a Pontiac indicate?

- The code P0017 indicates a problem with the correlation between the crankshaft position sensor and the camshaft position sensor in Bank 1, Sensor 'B'.

3. What are the possible causes of OBDII code P0017 in a Pontiac?

- Possible causes include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain issues, oil flow problems, or engine mechanical problems.

4. How can I diagnose the OBDII code P0017 in my Pontiac?

- Diagnosing the code P0017 usually involves checking the camshaft and crankshaft sensors, inspecting the timing chain, and ensuring proper oil flow to the sensors.

5. Can I continue driving my Pontiac with the OBDII code P0017?

- It is not recommended to continue driving with the code P0017, as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.

6. How can I repair OBDII code P0017 in my Pontiac?

- Repairing the code P0017 may involve replacing the camshaft or crankshaft position sensor, addressing timing chain issues, resolving oil flow problems, or repairing any engine mechanical issues.

7. Will resetting the OBDII code P0017 in my Pontiac make it go away permanently?

- Resetting the code may temporarily clear the check engine light, but if the underlying issue causing the code is not addressed, the code is likely to reappear.

8. How much does it typically cost to fix OBDII code P0017 in a Pontiac?

- The cost of fixing the code P0017 can vary depending on the specific issue causing the code and the labor rates of the repair shop. It's best to get a diagnostic from a professional.

9. Can a DIY enthusiast fix OBDII code P0017 in a Pontiac?

- While some aspects of diagnosing and repairing the code P0017 can be done by a DIY enthusiast, it may require specialized tools and expertise for certain repairs. Consulting a professional is recommended.

10. How often does OBDII code P0017 occur in Pontiac vehicles?

- OBDII code P0017 related to the crankshaft position - camshaft position correlation in Bank 1 Sensor 'B' can occur in Pontiac vehicles, especially as they age or if maintenance is neglected.