P0017 Audi Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'
Quick Answer
This fault code is stored in the Engine Control Module (ECM) when a synchronization error is detected between the camshaft and crankshaft. Common causes include Faulty Camshaft Position Sensor, Faulty Crankcase Pressure Sensor, Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0017 Audi indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Faulty Crankcase Pressure Sensor, Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0017 Audi Description
What are the Possible Causes of the DTC P0017 Audi?
- Faulty Camshaft Position Sensor
- Faulty Crankcase Pressure Sensor
- Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted
- Camshaft Position Sensor/Crankcase Pressure Sensor circuit poor electrical connection
- Mechanical Defect
How to Fix the DTC P0017 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0017 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0017 Audi code?
Need more information on how to fix the P0017 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0017 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0017 Audi Code
1. What are the common symptoms of OBDII code P0017 in an Audi related to the Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'?
- Common symptoms include rough idling, engine misfires, poor acceleration, and in some cases, the Check Engine light may illuminate.
2. What are the possible causes of OBDII code P0017 in an Audi?
- The code P0017 in an Audi can be triggered by issues such as a faulty camshaft position sensor, a problem with the timing chain or belt, engine oil sludge buildup, or a malfunctioning variable valve timing (VVT) solenoid.
3. How can I diagnose the OBDII code P0017 in my Audi?
- Diagnosis typically involves using an OBDII scanner to retrieve the fault code, inspecting the camshaft and crankshaft sensors, checking the timing chain or belt for proper alignment, and testing the VVT solenoid.
4. What are some repair tips for resolving OBDII code P0017 in an Audi?
- Repair tips may include replacing the camshaft position sensor, addressing any issues with the timing chain or belt, performing an engine oil flush to remove sludge, and replacing the VVT solenoid if necessary.
5. Can driving with OBDII code P0017 in an Audi cause further damage to the vehicle?
- Continuing to drive with code P0017 present in an Audi can potentially cause damage to the engine, affect fuel efficiency, and lead to more severe issues over time. It is recommended to address the problem promptly.
6. How much does it typically cost to repair OBDII code P0017 in an Audi at a professional auto repair shop?
- The cost of repairing code P0017 in an Audi can vary depending on the specific cause of the issue, but it may range from $200 to $800 or more, including parts and labor.
7. Is it possible to reset OBDII code P0017 in an Audi without fixing the underlying issue?
- While it is possible to clear the fault code temporarily, the Check Engine light is likely to reappear if the root cause of the problem is not addressed. It is recommended to diagnose and repair the issue to prevent further complications.
8. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0017 in an Audi?
- Depending on the cause of the code, some DIY enthusiasts may be able to address the issue themselves by following repair guides and using the necessary tools. However, more complex problems may require professional assistance.
9. How long does it typically take to repair OBDII code P0017 in an Audi?
- The repair time for code P0017 in an Audi can vary based on the specific cause and the extent of the issue. It may take anywhere from a few hours to a full day to complete the repairs.
10. Are there any preventive measures Audi owners can take to avoid encountering OBDII code P0017?
- Regular maintenance, such as timely oil changes, using high-quality engine oil, and following the manufacturer's recommended service schedule, can help prevent issues that may lead to code P0017 in an Audi.
Discuss the causes and fixes for P0017 Audi OBDII Code
Code P0017 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
