P0016 Subaru Code - Crankshaft Position - Camshaft Position Correlation Bank 1
Quick Answer
The Camshaft Position Sensor is a hall effect type sensor. Common causes include Dirty Oil, Faulty Oil Flow Control Solenoid, Faulty Camshaft Position Sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 Subaru indicates Crankshaft Position - Camshaft Position Correlation Bank 1.
- Common causes
- Common causes include Dirty Oil, Faulty Oil Flow Control Solenoid, Faulty Camshaft Position Sensors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 Subaru Description
What are the Possible Causes of the DTC P0016 Subaru?
- Dirty Oil
- Faulty Oil Flow Control Solenoid
- Faulty Camshaft Position Sensors
- Faulty Crankshaft Position Sensor
- Harness is open or shorted
- Circuit poor electrical connection
- Engine Timing
How to Fix the DTC P0016 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 Subaru code?
Need more information on how to fix the P0016 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 Subaru Code
1. What are the common symptoms of OBDII code P0016 in a Subaru related to the crankshaft position-camshaft position correlation issue?
- Common symptoms include engine misfires, rough idling, poor acceleration, and difficulty starting the vehicle.
2. What are the typical causes of OBDII code P0016 in a Subaru indicating a problem with the crankshaft-camshaft correlation on Bank 1?
- The main causes are a faulty camshaft or crankshaft position sensor, timing chain or belt issues, incorrect engine oil viscosity, or a problem with the engine control module (ECM).
3. How can I diagnose and repair OBDII code P0016 in my Subaru related to the correlation between the crankshaft and camshaft positions on Bank 1?
- Diagnosis involves checking the camshaft and crankshaft sensors, inspecting the timing chain or belt, verifying oil levels and quality, and scanning the ECM for any related faults.
4. Can driving with OBDII code P0016 in a Subaru, indicating a crankshaft-camshaft correlation issue on Bank 1, cause further damage to the engine?
- Yes, driving with this code can potentially cause damage to the engine if the underlying issue is not addressed promptly, as it can lead to improper engine timing and affect performance.
5. Is it safe to continue driving my Subaru with OBDII code P0016 indicating a problem with the crankshaft-camshaft correlation on Bank 1 if the symptoms are not severe?
- It is not recommended to drive the vehicle for an extended period with this code present, as unresolved timing issues can escalate and potentially cause more significant damage to the engine.
6. How much does it typically cost to repair OBDII code P0016 in a Subaru related to the crankshaft-camshaft correlation on Bank 1?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred dollars for sensor replacement to over a thousand dollars for timing chain or belt repairs.
7. Are there any preventive maintenance tips to help avoid encountering OBDII code P0016 in a Subaru due to crankshaft-camshaft correlation problems on Bank 1?
- Regularly scheduled maintenance, including timely oil changes, inspections of the timing components, and monitoring engine performance, can help prevent issues leading to this trouble code.
8. Can a DIY enthusiast with moderate automotive knowledge and tools fix OBDII code P0016 in a Subaru related to the crankshaft-camshaft correlation on Bank 1?
- Depending on the specific cause, some DIY repairs like sensor replacement may be feasible, but more complex issues with timing components or the ECM may require professional expertise.
9. Will resetting the OBDII system clear the P0016 code in a Subaru, indicating a problem with crankshaft-camshaft correlation on Bank 1?
- Resetting the system may temporarily clear the code, but if the underlying issue causing the correlation problem is not addressed, the code is likely to return after driving the vehicle.
10. What should I do if my Subaru continues to display OBDII code P0016 even after attempting repairs related to the crankshaft-camshaft correlation issue on Bank 1?
- If the code persists, despite repair attempts, it is advisable to seek assistance from a qualified mechanic or dealership to diagnose and address the root cause of the problem effectively.
Discuss the causes and fixes for P0016 Subaru OBDII Code
Code P0016 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
