P0016 Audi Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'
Quick Answer
This fault code is stored in the Engine Control Module (ECM) when a synchronization error is detected between the camshaft and crankshaft. Common causes include Faulty Camshaft Position Sensor, Faulty Crankcase Pressure Sensor, Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 Audi indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Faulty Crankcase Pressure Sensor, Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 Audi Description
What are the Possible Causes of the DTC P0016 Audi?
- Faulty Camshaft Position Sensor
- Faulty Crankcase Pressure Sensor
- Camshaft Position Sensor/Crankcase Pressure Sensor harness is open or shorted
- Camshaft Position Sensor/Crankcase Pressure Sensor circuit poor electrical connection
- Mechanical Defect
How to Fix the DTC P0016 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 Audi code?
Need more information on how to fix the P0016 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 Audi Code
1. What are the common symptoms of OBDII code P0016 in an Audi?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and potentially stalling.
2. What does the OBDII code P0016 in an Audi indicate?
- The code P0016 indicates a crankshaft position - camshaft position correlation problem in Bank 1 Sensor 'A'.
3. What are the possible causes of OBDII code P0016 in an Audi?
- Possible causes include a faulty camshaft or crankshaft position sensor, timing chain issues, engine oil problems, or a malfunctioning variable valve timing system.
4. Can driving with the OBDII code P0016 in an Audi cause further damage?
- Continuing to drive with code P0016 can potentially cause damage to the engine, especially if the issue is related to timing chain problems.
5. How can I diagnose the OBDII code P0016 in my Audi?
- Diagnosing code P0016 typically involves checking the camshaft and crankshaft sensors, inspecting the timing chain, and verifying proper oil levels and quality.
6. Is it safe to continue driving my Audi with the OBDII code P0016?
- It is not recommended to drive your Audi with code P0016, as it can lead to more serious engine issues and potential breakdowns.
7. How can I repair the OBDII code P0016 in my Audi?
- Repairing code P0016 may involve replacing the camshaft or crankshaft position sensor, addressing timing chain problems, ensuring proper engine oil levels, or fixing the variable valve timing system.
8. Will resetting the OBDII code P0016 in my Audi solve the issue?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing code P0016.
9. How much does it cost to repair the OBDII code P0016 in an Audi?
- The cost of repairing code P0016 can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, depending on the extent of the repairs needed.
10. Can a DIY enthusiast fix the OBDII code P0016 in an Audi?
- Depending on the skill level and experience of the individual, some DIY enthusiasts may be able to address simpler causes of code P0016, such as sensor replacements. However, more complex issues may require professional assistance.
Discuss the causes and fixes for P0016 Audi OBDII Code
-
My 2004 Audi TT 3.2 V6 has a rough idle but revs ok have changed plugs and crankshaft sensor but is still the same. I have ordered 2 x camshaft sensors but having tested the original ones I'm not convinced this will solve the problem. There is no cam chain noise as far as I am aware.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
