AutoCodes – Toyota – P0016 2013 Toyota RAV4

P0016 2013 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'

Quick Answer

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0016 2013 Toyota RAV4 indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
Common causes: Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 641

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0016 2013 Toyota RAV4 Description

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). The ECM performs intake and exhaust valve control by performing the following: 1) controlling the camshaft and camshaft timing oil control valve assembly and operating the camshaft timing gear; and 2) changing the relative positions of the camshaft and crankshaft. To monitor the correlation of the intake camshaft position and crankshaft position, the ECM checks the VVT learned value while the engine is idling. The VVT learned value is calibrated based on the camshaft position and crankshaft position. The intake valve timing is set to the most retarded angle while the engine is idling. If the VVT learned value is out of the specified range in consecutive driving cycles, the ECM illuminates the MIL and stores Diagnostic Trouble Code (DTC) P0016.

OBDII Code P0016 2013 Toyota RAV4 - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A' - AutoCodes.com — P0016 2013 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'

What does this mean?

What are the Possible Causes of the DTC P0016 2013 Toyota RAV4?

Low or Dirty Engine Oil
Oil control valve filter
Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft)
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0016 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0016 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0016 2013 Toyota RAV4 code?

Need more information on how to fix the P0016 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0016 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0016 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0016 in a 2013 Toyota RAV4?

The common symptoms include rough idling, engine misfires, decreased fuel efficiency, and possibly stalling.

2. What does OBDII code P0016 in a 2013 Toyota RAV4 indicate?

Code P0016 indicates a problem with the correlation between the crankshaft position sensor and the camshaft position sensor on Bank 1 Sensor 'A'.

3. What are the possible causes of OBDII code P0016 in a 2013 Toyota RAV4?

Possible causes include a faulty camshaft position sensor, crankshaft position sensor, timing chain/belt issues, engine mechanical problems, or a malfunctioning Variable Valve Timing (VVT) system.

4. How can I diagnose the cause of OBDII code P0016 in my 2013 Toyota RAV4?

Diagnosis typically involves checking the camshaft and crankshaft position sensor readings, inspecting the timing chain/belt, examining the VVT system, and verifying proper engine timing.

5. Can I still drive my 2013 Toyota RAV4 with OBDII code P0016?

It is not recommended to drive the vehicle with code P0016 as it can lead to further engine damage or potential safety hazards. It's best to address the issue promptly.

6. How can I repair OBDII code P0016 in my 2013 Toyota RAV4?

Repairs may involve replacing the camshaft or crankshaft position sensor, repairing or replacing the timing chain/belt, addressing VVT system issues, or fixing any engine mechanical problems.

7. Will resetting the OBDII code P0016 in my 2013 Toyota RAV4 solve the issue?

Simply resetting the code will not fix the underlying problem causing P0016. It's essential to diagnose the issue properly and perform necessary repairs to resolve the code.

8. How much does it cost to fix OBDII code P0016 in a 2013 Toyota RAV4?

The cost of repairs for code P0016 can vary depending on the specific cause and required parts/labour. It's advisable to get a professional diagnosis for an accurate estimate.

9. Can a DIY enthusiast fix OBDII code P0016 in a 2013 Toyota RAV4?

While some experienced DIYers may be able to address simpler causes like sensor replacements, diagnosing and repairing more complex issues related to P0016 may require professional expertise.

10. How often does OBDII code P0016 occur in 2013 Toyota RAV4 vehicles?

While not extremely common, code P0016 can occur in 2013 Toyota RAV4 models due to various factors like sensor wear, timing component issues, or VVT system malfunctions.