P0016 2012 Ford Fusion Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'
Quick Answer
This Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects Variable Camshaft Timing (VCT) position misalignment between the camshaft and crankshaft. Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 2012 Ford Fusion indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
- Common causes
- Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 2012 Ford Fusion Description
What are the Possible Causes of the DTC P0016 2012 Ford Fusion?
- Camshaft timing incorrectly set
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid stuck in position
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0016 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 2012 Ford Fusion code?
Need more information on how to fix the P0016 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 2012 Ford Fusion Code
1. What does OBDII code P0016 on a 2012 Ford Fusion mean?
- OBDII code P0016 indicates a "Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'A'" error.
2. What are common symptoms of OBDII code P0016 in a 2012 Ford Fusion?
- Common symptoms of P0016 may include rough idling, engine misfires, poor acceleration, and even stalling.
3. What are possible causes of OBDII code P0016 in a 2012 Ford Fusion?
- Causes of P0016 can include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain issues, or engine timing problems.
4. How can I diagnose OBDII code P0016 on a 2012 Ford Fusion?
- Diagnosing P0016 usually involves checking the camshaft and crankshaft sensors, inspecting the timing chain, and verifying the engine's timing marks.
5. Can driving with OBDII code P0016 on a 2012 Ford Fusion cause further damage?
- Continuing to drive with P0016 may lead to engine damage, reduced fuel efficiency, and potential catalytic converter issues.
6. What are the repair options for OBDII code P0016 in a 2012 Ford Fusion?
- Repair options for P0016 may include replacing the camshaft or crankshaft sensors, fixing timing chain issues, or re-timing the engine.
7. Does OBDII code P0016 on a 2012 Ford Fusion require immediate attention?
- Yes, P0016 should be addressed promptly to prevent potential engine damage and ensure the vehicle operates correctly.
8. Can a DIY enthusiast fix OBDII code P0016 in a 2012 Ford Fusion?
- While some aspects of diagnosing P0016 can be done by DIY enthusiasts, resolving the issue may require specialized tools and expertise.
9. How much does it typically cost to repair OBDII code P0016 in a 2012 Ford Fusion?
- The cost of repairing P0016 can vary depending on the exact cause, but it may range from a few hundred to over a thousand dollars.
10. Can resetting the OBDII system clear P0016 from a 2012 Ford Fusion?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, P0016 is likely to return.
Discuss the causes and fixes for P0016 2012 Ford Fusion OBDII Code
Code P0016 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
