P0016 2011 Ford Fusion Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'
Quick Answer
This Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects Variable Camshaft Timing (VCT) position misalignment between the camshaft and crankshaft. Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 2011 Ford Fusion indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
- Common causes
- Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0016 2011 Ford Fusion?
- Camshaft timing incorrectly set
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid stuck in position
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0016 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 2011 Ford Fusion code?
Need more information on how to fix the P0016 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0016 in a 2011 Ford Fusion?
- Common symptoms include rough idling, reduced engine performance, engine misfires, and potentially stalling.
2. What does the OBDII code P0016 'Crankshaft Position Camshaft Position Correlation Bank 1 Sensor A' mean for a 2011 Ford Fusion?
- This code indicates that there is a misalignment between the crankshaft and camshaft positions in bank 1 of the engine, specifically sensor A.
3. What are the possible causes of OBDII code P0016 in a 2011 Ford Fusion?
- Potential causes include a faulty camshaft or crankshaft position sensor, timing chain issues, incorrect oil viscosity, or a problem with the engine's timing.
4. How can I diagnose the cause of OBDII code P0016 in my 2011 Ford Fusion?
- Diagnosing the issue may involve checking the camshaft and crankshaft sensors, inspecting the timing chain, ensuring proper oil levels and viscosity, and examining the engine's timing components.
5. Can driving with OBDII code P0016 in a 2011 Ford Fusion cause further damage?
- Continuing to drive with this code can potentially lead to engine damage, reduced fuel efficiency, and further performance issues, so it is advisable to address the problem promptly.
6. How can I repair OBDII code P0016 in my 2011 Ford Fusion?
- Repair options may include replacing the camshaft or crankshaft position sensor, inspecting and potentially replacing the timing chain, ensuring proper oil levels and viscosity, and correcting any timing-related issues.
7. Is it safe to continue driving my 2011 Ford Fusion with OBDII code P0016 present?
- It is not recommended to drive the vehicle with this code active, as it can lead to engine problems and potential safety issues. It's best to address the underlying cause promptly.
8. Will resetting the OBDII code P0016 on my 2011 Ford Fusion make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue causing the code is not addressed, it is likely to reappear. It is important to diagnose and repair the root cause of the problem.
9. Can a DIY enthusiast fix OBDII code P0016 in a 2011 Ford Fusion?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address this issue by replacing sensors or inspecting timing components. However, more complex repairs may require professional assistance.
10. How much can I expect to pay for repairing OBDII code P0016 in a 2011 Ford Fusion?
- The cost of repairs for this code can vary depending on the specific cause and the extent of the issue. It's advisable to consult a mechanic for a diagnosis and cost estimate.
Discuss the causes and fixes for P0016 2011 Ford Fusion OBDII Code
Code P0016 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
