P0014 Volvo Code - Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1
Quick Answer
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Volvo indicates Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Volvo Description
What are the Possible Causes of the DTC P0014 Volvo?
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0014 Volvo?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Volvo code?
Need more information on how to fix the P0014 Volvo code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Volvo code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Volvo Code
1. What are the common symptoms of OBDII code P0014 in a Volvo?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and potential stalling.
2. What are the possible causes of OBDII code P0014 in a Volvo?
- Possible causes include a faulty camshaft position sensor, a malfunctioning variable valve timing (VVT) solenoid, engine oil sludge, or timing chain issues.
3. How can I diagnose the OBDII code P0014 in my Volvo?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the camshaft position sensor and VVT solenoid, checking the engine oil level and condition, and inspecting the timing chain.
4. Can I continue driving my Volvo with OBDII code P0014?
- It is not recommended to continue driving with code P0014 as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
5. How can I repair OBDII code P0014 in my Volvo?
- Repair options may include replacing the camshaft position sensor, replacing the VVT solenoid, performing an engine oil change, repairing or replacing the timing chain, or seeking professional assistance.
6. Is it safe to reset the OBDII code P0014 in my Volvo without fixing the underlying issue?
- Resetting the code without addressing the root cause may temporarily clear the warning light, but the issue will likely resurface. It is important to diagnose and repair the problem to prevent further damage.
7. Will driving with OBDII code P0014 damage my Volvo's engine?
- Continuing to drive with code P0014 may cause engine damage over time, such as reduced performance, decreased fuel efficiency, or potential engine failure. It is best to address the issue promptly.
8. How much does it cost to repair OBDII code P0014 in a Volvo?
- The cost of repairing code P0014 can vary depending on the specific cause of the issue, parts needed, and labor costs. It is recommended to obtain quotes from reputable mechanics or Volvo dealerships.
9. Can a DIY enthusiast fix OBDII code P0014 in a Volvo?
- Depending on the skill level and experience of the individual, some DIY enthusiasts may be able to address code P0014 by replacing components like the camshaft position sensor or VVT solenoid. However, more complex repairs may require professional assistance.
10. How often does OBDII code P0014 occur in Volvo vehicles?
- OBDII code P0014, indicating camshaft position 'B' timing over-advanced or system performance bank 1, can occur in Volvo vehicles with variable valve timing systems, particularly in models with higher mileage or inadequate maintenance.
Discuss the causes and fixes for P0014 Volvo OBDII Code
Code P0014 Volvo comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
