AutoCodes – Volkswagen – P0014 Volkswagen

P0014 Volkswagen Code - 'B' Camshaft Position Timing Over-Advanced Or System Performance Bank 1

Quick Answer

This fault code is stored in the Engine Control Module (ECM) when a malfunction occurs in the camshaft position sensor monitoring system. Common causes include Dirty engine oil, Mechanical Defect, Valve Timing. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0014 Volkswagen indicates 'B' Camshaft Position Timing Over-Advanced Or System Performance Bank 1.
Common causes: Common causes include Dirty engine oil, Mechanical Defect, Valve Timing.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,110

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 05, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0014 Volkswagen Description

This fault code is stored in the Engine Control Module (ECM) when a malfunction occurs in the camshaft position sensor monitoring system. This fault code can be set due to a fault with the camshaft position sensor, phonic wheel, associated wiring or engine control module. A mechanical defect which affects static valve timing can also cause this issue. A variable valve timing defect must also be investigated, including oil supply to the oil control solenoid. The oil control solenoid should also be tested using an oscilloscope, the solenoid may be operated during an actuator test. A fault in the sprocket dephaser or variator will also cause this fault code to be set.
A relationship test with an oscilloscope can be used to check the valve timing. For vehicles with a phonic wheel which is attached to a keyless pulley it must be noted that the static valve timing maybe correct but the position of the phonic wheel is incorrect.

OBDII Code P0014 Volkswagen - 'B' Camshaft Position Timing Over-Advanced Or System Performance Bank 1 - AutoCodes.com — P0014 Volkswagen Code - 'B' Camshaft Position Timing Over-Advanced Or System Performance Bank 1

What does this mean?

What are the Possible Causes of the DTC P0014 Volkswagen?

Dirty engine oil
Mechanical Defect
Valve Timing
Faulty Continuously Variable Valve Timing Solenoid
Continuously Variable Valve Timing Solenoid harness is open or shorted
Continuously Variable Valve Timing Solenoid circuit poor electrical connection

How to Fix the DTC P0014 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0014 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0014 Volkswagen code?

Need more information on how to fix the P0014 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0014 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0014 Volkswagen Code

1. What are the common symptoms of OBDII code P0014 in a Volkswagen?

- Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and potential stalling.

2. What can cause the OBDII code P0014 in a Volkswagen?

- The code is typically triggered by issues with the 'B' camshaft position timing being over-advanced or system performance problems in Bank 1.

3. How serious is the OBDII code P0014 in a Volkswagen?

- This code can lead to poor engine performance and potential damage if left unaddressed, so it should be diagnosed and repaired promptly.

4. What are some possible repair tips for OBDII code P0014 in a Volkswagen?

- Repairs may involve checking the camshaft timing, inspecting the camshaft phaser, replacing the camshaft position sensor, or addressing oil flow issues.

5. Can driving with the OBDII code P0014 in a Volkswagen cause further damage?

- Continuing to drive with this code can potentially cause damage to the engine components, such as the camshaft and timing chain, so it's best to address it promptly.

6. How can I diagnose the OBDII code P0014 in my Volkswagen at home?

- Basic diagnostics may involve checking the oil levels, inspecting the camshaft position sensor, and looking out for any visible signs of damage or wear in the timing components.

7. Is it safe to reset the OBDII code P0014 in a Volkswagen using a diagnostic tool?

- While resetting the code may temporarily clear the warning light, it's crucial to diagnose the underlying issue causing the code to prevent further problems.

8. Can a faulty camshaft position sensor trigger the OBDII code P0014 in a Volkswagen?

- Yes, a malfunctioning camshaft position sensor can disrupt the timing system and trigger the 'B' camshaft position over-advanced code.

9. How much does it typically cost to repair the OBDII code P0014 in a Volkswagen?

- Repair costs can vary depending on the specific issue causing the code, but they may range from a few hundred to over a thousand dollars, including parts and labor.

10. Are there any preventive maintenance steps to avoid encountering the OBDII code P0014 in a Volkswagen?

- Regularly scheduled maintenance, including oil changes and inspections of the timing components, can help prevent issues that may trigger the P0014 code.