P0014 Suzuki Code - Exhaust Camshaft Position System Performance Bank 1
Quick Answer
This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the exhaust valve. Common causes include Dirty Oil, Faulty Exhaust valve timing control solenoid valve, Exhaust valve timing control solenoid valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Suzuki indicates Exhaust Camshaft Position System Performance Bank 1.
- Common causes
- Common causes include Dirty Oil, Faulty Exhaust valve timing control solenoid valve, Exhaust valve timing control solenoid valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Suzuki Description
The Engine Control Module (ECM) receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the exhaust valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in the low/mid speed range and output in the high-speed range.
The intake valve timing control solenoid valve changes the oil amount and direction of flow through the intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position. When there is a gap between the angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0014 code.
What are the Possible Causes of the DTC P0014 Suzuki?
- Dirty Oil
- Faulty Exhaust valve timing control solenoid valve
- Exhaust valve timing control solenoid valve harness is open or shorted
- Exhaust valve timing control solenoid valve circuit poor electrical connection
- Faulty Crankshaft position sensor (POS)
- Faulty Camshaft position sensor
How to Fix the DTC P0014 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Suzuki code?
Need more information on how to fix the P0014 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Suzuki Code
1. What are the common symptoms of OBDII code P0014 in a Suzuki related to the Exhaust Camshaft Position System Performance Bank 1?
The common symptoms include rough idling, decreased fuel efficiency, engine misfires, and the illumination of the check engine light.
2. What typically causes the OBDII code P0014 in a Suzuki?
The code P0014 in a Suzuki is often caused by a faulty exhaust camshaft position actuator solenoid, a malfunctioning camshaft position sensor, or issues with the timing chain or belt.
3. How can I diagnose the OBDII code P0014 in my Suzuki?
Diagnosing the code P0014 involves conducting a visual inspection of the camshaft position actuator, checking the wiring and connectors for any damage, and performing a scan tool test to monitor the camshaft position sensor data.
4. Can I drive my Suzuki with the OBDII code P0014 present?
It is not recommended to drive your Suzuki with the code P0014 present, as it can lead to further engine damage and potentially cause safety issues on the road.
5. What are some repair tips for fixing the OBDII code P0014 in a Suzuki?
Repair tips for addressing the code P0014 include replacing the exhaust camshaft position actuator solenoid, inspecting and repairing any damaged wiring or connectors, and ensuring proper timing chain or belt alignment.
6. How much does it typically cost to repair the OBDII code P0014 in a Suzuki?
The cost of repairing the code P0014 in a Suzuki can vary depending on the specific issue, but it typically ranges from $200 to $500 for parts and labor.
7. Can the OBDII code P0014 in a Suzuki be fixed without professional help?
While some DIY enthusiasts may attempt to address the code P0014 themselves, it is recommended to seek professional help to ensure proper diagnosis and repair of the issue.
8. Is the OBDII code P0014 in a Suzuki a common problem?
Yes, the OBDII code P0014 related to the Exhaust Camshaft Position System Performance Bank 1 is a common issue in Suzuki vehicles, especially in models equipped with variable valve timing systems.
9. Will resetting the check engine light make the OBDII code P0014 go away?
Resetting the check engine light may temporarily clear the code P0014, but if the underlying issue is not addressed, the code is likely to reappear after some time.
10. Are there any recalls or service bulletins related to the OBDII code P0014 in Suzuki vehicles?
It is advisable to check with Suzuki dealerships or online resources for any recalls or service bulletins related to the OBDII code P0014 affecting Suzuki vehicles to stay informed about potential solutions or updates from the manufacturer.
Discuss the causes and fixes for P0014 Suzuki OBDII Code
Code P0014 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
