P0014 Scion Code - Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1
Quick Answer
The Variable Valve Timing (VVT) system adjusts the intake valve timing to improve driveability. Common causes include Low or Dirty Engine Oil, Valve timing, Faulty Camshaft Timing Oil Control Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Scion indicates Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Valve timing, Faulty Camshaft Timing Oil Control Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Scion Description
The camshaft timing oil control valve assembly is a solenoid valve and switches the engine oil line. The valve moves when the Engine Control Module (ECM) applies 12 V to the solenoid. The ECM changes the energizing time to the solenoid (duty-cycle) in accordance with the camshaft position, crankshaft position, throttle position, etc.
The ECM optimizes the exhaust valve timing using the Variable Valve Timing (VVT) system to control the exhaust camshaft. The VVT system includes the ECM, the camshaft timing oil control valve assembly and the VVT controller (camshaft timing exhaust gear assembly). The ECM sends a target duty-cycle control signal to the camshaft timing oil control valve assembly. This control signal regulates the oil pressure supplied to the VVT controller. The VVT controller can advance or retard the exhaust camshaft.
What are the Possible Causes of the DTC P0014 Scion?
- Low or Dirty Engine Oil
- Valve timing
- Faulty Camshaft Timing Oil Control Valve Assembly
- Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
- Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0014 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Scion code?
Need more information on how to fix the P0014 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Scion Code
1. What are the common symptoms of OBDII code P0014 in a Scion?
The common symptoms of P0014 typically include rough idling, reduced engine performance, poor fuel economy, and illuminated Check Engine Light.
2. What is the cause of OBDII code P0014 in a Scion?
OBDII code P0014 in a Scion is usually caused by issues with the camshaft position 'B' timing being over-advanced or system performance problems in Bank 1.
3. How serious is the OBDII code P0014 in a Scion?
While the vehicle may still be operable with OBDII code P0014, it is important to address the issue promptly to prevent potential damage to the engine and ensure optimal performance.
4. Can driving with OBDII code P0014 in a Scion cause further damage?
Continued driving with OBDII code P0014 in a Scion can potentially cause damage to the engine components, such as the camshaft and timing chain, if left unresolved for an extended period.
5. How can I diagnose OBDII code P0014 in my Scion?
Diagnosing OBDII code P0014 involves using an OBDII scanner to retrieve the code, performing visual inspections of the camshaft position sensor and related components, and checking the timing of the camshaft.
6. What are some repair tips for resolving OBDII code P0014 in a Scion?
Repair tips for addressing OBDII code P0014 in a Scion may include repairing or replacing the camshaft position sensor, checking and adjusting the timing chain, and ensuring proper oil levels and quality.
7. Is it possible to clear OBDII code P0014 in a Scion without fixing the underlying issue?
Clearing OBDII code P0014 without fixing the underlying issue may temporarily turn off the Check Engine Light, but the code is likely to reappear if the root cause is not addressed.
8. Can a DIY enthusiast fix OBDII code P0014 in a Scion?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P0014 in a Scion, the complexity of the issue may require professional assistance to ensure proper resolution.
9. How much does it typically cost to repair OBDII code P0014 in a Scion?
The cost of repairing OBDII code P0014 in a Scion can vary depending on the underlying cause, parts needed for repair, and labor costs, but it may range from a few hundred to a thousand dollars.
10. How can I prevent OBDII code P0014 from occurring in my Scion in the future?
To prevent OBDII code P0014 in the future, it is essential to perform regular maintenance, such as timely oil changes, using high-quality oil, and addressing any engine performance issues promptly.
Discuss the causes and fixes for P0014 Scion OBDII Code
Code P0014 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
