AutoCodes – Isuzu – P0014 Isuzu

P0014 Isuzu Code - Camshaft Phase Angle Error

Quick Answer

The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for an over-advanced camshaft timing. Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0014 Isuzu indicates Camshaft Phase Angle Error.
Common causes: Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,618

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0014 Isuzu Description

The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for an over-advanced camshaft timing. The Diagnostic Trouble Code (DTC) will set when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position.

OBDII Code P0014 Isuzu - Camshaft Phase Angle Error - AutoCodes.com — P0014 Isuzu Code - Camshaft Phase Angle Error

What does this mean?

What are the Possible Causes of the DTC P0014 Isuzu?

Low or Dirty Engine Oil
Incorrect camshaft timing
Faulty Variable Camshaft Timing (VCT) Solenoid Valve
Variable Camshaft Timing Solenoid Valve circuit is open or shorted
Variable Camshaft Timing Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0014 Isuzu?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0014 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0014 Isuzu code?

Need more information on how to fix the P0014 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0014 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0014 Isuzu Code

1. What is OBDII code P0014 indicating for my Isuzu?

- OBDII code P0014 on an Isuzu typically indicates a camshaft phase angle error.

2. What are the common symptoms of a P0014 code in an Isuzu?

- Common symptoms of a P0014 code in an Isuzu may include rough idling, poor engine performance, and reduced fuel efficiency.

3. What are the possible causes of a P0014 code in an Isuzu?

- The P0014 code in an Isuzu can be triggered by issues such as a faulty camshaft position sensor, a malfunctioning camshaft phaser, or timing chain problems.

4. How can I diagnose the source of a P0014 code in my Isuzu?

- Diagnosing a P0014 code in an Isuzu involves checking the camshaft position sensor, inspecting the camshaft phaser for proper operation, and examining the timing chain for wear or slack.

5. What are the recommended repair options for a P0014 code in an Isuzu?

- Repair options for a P0014 code in an Isuzu may include replacing the camshaft position sensor, repairing or replacing the camshaft phaser, and addressing any timing chain issues.

6. Can I continue driving my Isuzu with a P0014 code?

- It is not recommended to continue driving an Isuzu with a P0014 code as it can lead to further engine damage and potential safety hazards.

7. How much does it typically cost to repair a P0014 code in an Isuzu?

- Repair costs for a P0014 code in an Isuzu can vary depending on the extent of the issue, but it may range from a few hundred to over a thousand dollars.

8. Can a DIY enthusiast fix a P0014 code in an Isuzu?

- While some experienced DIY enthusiasts may be able to address a P0014 code in an Isuzu, it is recommended to seek professional help due to the complexity of the engine components involved.

9. Will resetting the OBDII code solve the P0014 issue in my Isuzu?

- Simply resetting the OBDII code may temporarily clear the warning light, but it will not fix the underlying problem causing the P0014 code in an Isuzu.

10. How can I prevent a P0014 code from reoccurring in my Isuzu?

- To prevent a P0014 code from reoccurring in your Isuzu, it's important to perform regular maintenance, address any engine performance issues promptly, and follow the manufacturer's recommended service schedule.