AutoCodes – Mitsubishi – P0013 Mitsubishi

P0013 Mitsubishi Code - Exhaust Engine Oil Control Valve Circuit

Quick Answer

The Powertrain Control Module (PCM) detects that the actual state of the camshaft position solenoid does not match the intended state. Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0013 Mitsubishi indicates Exhaust Engine Oil Control Valve Circuit.
Common causes
Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 11,114
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 09, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0013 Mitsubishi Description

The Powertrain Control Module (PCM) detects that the actual state of the camshaft position solenoid does not match the intended state. The PCM monitors the Variable Camshaft Timing (VCT) circuit for high and low voltage. The Diagnostic Trouble Code (DTC) will set if the voltage exceeds a calibrated limit for a calibrated amount of time.
OBDII Code P0013 Mitsubishi - Exhaust Engine Oil Control Valve Circuit - AutoCodes.com
P0013 Mitsubishi Code - Exhaust Engine Oil Control Valve Circuit

What are the Possible Causes of the DTC P0013 Mitsubishi?

  • Low or Dirty Engine Oil
  • Incorrect camshaft timing
  • Faulty Variable Camshaft Timing (VCT) Solenoid Valve
  • Variable Camshaft Timing Solenoid Valve circuit is open or shorted
  • Variable Camshaft Timing Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0013 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0013 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0013 Mitsubishi code?

Need more information on how to fix the P0013 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0013 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0013 Mitsubishi Code

1. What does the OBDII code P0013 mean on a Mitsubishi?

P0013 indicates an issue with the exhaust camshaft position actuator circuit, specifically in the exhaust engine oil control valve.

2. What are the common symptoms of a P0013 code?

Symptoms may include rough idling, poor acceleration, reduced fuel efficiency, engine misfire, and the check engine light illuminating.

3. What causes the P0013 code in a Mitsubishi?

Common causes include a faulty exhaust camshaft oil control valve, damaged wiring or connectors, low engine oil level, or oil contamination.

4. Can low engine oil cause a P0013 code?

Yes, low or dirty engine oil can cause a P0013 code as it may affect the operation of the oil control valve.

5. How do I diagnose a P0013 code?

Diagnosis typically involves checking the oil control valve, inspecting wiring and connectors, verifying proper oil levels, and testing the circuit with a multimeter.

6. What repairs are needed to fix a P0013 code?

Repairs may include replacing the exhaust camshaft oil control valve, repairing damaged wiring, cleaning oil passages, or performing an oil change.

7. Can I drive with a P0013 code on my Mitsubishi?

While the vehicle may still be drivable, driving with a P0013 code can lead to reduced performance and potentially cause further engine damage if not addressed.

8. How much does it cost to fix a P0013 code?

The repair cost varies, but replacing the oil control valve typically ranges from $150 to $300, including parts and labor.

9. Can a dirty oil control valve cause a P0013 code?

Yes, a dirty or clogged oil control valve can restrict oil flow and trigger the P0013 code.

10. Will clearing the code fix a P0013 issue permanently?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0013 Mitsubishi OBDII Code

Code P0013 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play