AutoCodes – Jeep – P0013 Jeep

P0013 Jeep Code - Bank 1 Camshaft 2 Position Actuator Circuit Open

Quick Answer

Variable Cam Timing (VCT) allows the Powertrain Control Module (PCM) to monitor and adjust the position of the camshaft, based on desired torque levels and engine operating conditions. Common causes include Faulty Variable Cam Timing (VCT) solenoid, Variable Cam Timing solenoid circuit is open or shorted, Variable Cam Timing solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0013 Jeep indicates Bank 1 Camshaft 2 Position Actuator Circuit Open.
Common causes
Common causes include Faulty Variable Cam Timing (VCT) solenoid, Variable Cam Timing solenoid circuit is open or shorted, Variable Cam Timing solenoid circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 24,538
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 05, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0013 Jeep Description

Variable Cam Timing (VCT) allows the Powertrain Control Module (PCM) to monitor and adjust the position of the camshaft, based on desired torque levels and engine operating conditions. The camshaft design allows for the exhaust lobes to be adjusted while the intake lobes are not adjustable all on one camshaft. The PCM controls a solenoid operated control valve, which is used to direct oil pressure to a hydraulic actuator mounted between the camshaft and its driving sprocket. The oil pressure alters the angular position or phasing of the camshaft relative to crankshaft rotation. A sensor is used to monitor the position of the camshaft.
The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module detects that the actual voltage of the VCT solenoid control circuit does not match the intended state. One Trip Fault. Three good trips to turn off the MIL.
OBDII Code P0013 Jeep - Bank 1 Camshaft 2 Position Actuator Circuit Open - AutoCodes.com
P0013 Jeep Code - Bank 1 Camshaft 2 Position Actuator Circuit Open

What are the Possible Causes of the DTC P0013 Jeep?

  • Faulty Variable Cam Timing (VCT) solenoid
  • Variable Cam Timing solenoid circuit is open or shorted
  • Variable Cam Timing solenoid circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0013 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0013 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0013 Jeep code?

Need more information on how to fix the P0013 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0013 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0013 Jeep Code

1. What are the common symptoms of OBDII code P0013 in a Jeep related to Bank 1 Camshaft 2 Position Actuator Circuit Open?

The common symptoms include rough idling, engine misfires, poor acceleration, and even stalling.

2. What are the possible causes of OBDII code P0013 in a Jeep indicating Bank 1 Camshaft 2 Position Actuator Circuit Open?

The possible causes may include a faulty camshaft position actuator, wiring issues, poor electrical connections, or a malfunctioning engine control module (ECM).

3. How can I diagnose OBDII code P0013 in a Jeep for Bank 1 Camshaft 2 Position Actuator Circuit Open?

Diagnosis can involve checking the wiring and connections related to the camshaft position actuator, inspecting the actuator itself for proper operation, and using a scan tool to monitor camshaft position sensor data.

4. What are some repair tips for resolving OBDII code P0013 in a Jeep indicating Bank 1 Camshaft 2 Position Actuator Circuit Open?

Repair tips may include repairing or replacing damaged wiring, ensuring proper electrical connections, replacing the camshaft position actuator if necessary, and resetting the ECM after repairs are made.

5. Can driving with OBDII code P0013 related to Bank 1 Camshaft 2 Position Actuator Circuit Open cause further damage to the vehicle?

Continued driving with this issue can potentially lead to engine damage, reduced fuel efficiency, and further complications with the vehicle's performance.

6. How urgent is it to address OBDII code P0013 in a Jeep indicating Bank 1 Camshaft 2 Position Actuator Circuit Open?

It is recommended to address this issue promptly to prevent potential engine damage and to ensure the vehicle operates safely and efficiently.

7. Is it possible to clear OBDII code P0013 in a Jeep related to Bank 1 Camshaft 2 Position Actuator Circuit Open without making any repairs?

Clearing the code without addressing the underlying issue will only temporarily remove the warning light, but the problem will persist and may worsen over time.

8. Can a DIY enthusiast without extensive automotive experience fix OBDII code P0013 in a Jeep signaling Bank 1 Camshaft 2 Position Actuator Circuit Open?

While some repairs related to this code can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair.

9. Will resetting the ECM clear OBDII code P0013 in a Jeep due to Bank 1 Camshaft 2 Position Actuator Circuit Open?

Resetting the ECM may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return after driving the vehicle for a certain distance or time.

10. How can I prevent OBDII code P0013 from occurring again in my Jeep after repairing Bank 1 Camshaft 2 Position Actuator Circuit Open?

Regular maintenance, timely repairs of any related issues, and ensuring proper electrical connections can help prevent the recurrence of this OBDII code in the future.

Discuss the causes and fixes for P0013 Jeep OBDII Code

  • 2007 Jeep Patriot
    New Camshaft Actuators Banks 1 & 2 have been replaced, got a brand new battery, new Camshaft position sensors both 1 & 2, new fuel pump system, new throttle body and pedal position sensor, brand new crankshaft position sensor. Still receiving codes P0010 & P0013 codes? Will crank but turn engine over. I have clears the codes and still nothing...?

  • Is the engine not starting?
    Usually, problems that will set the engine code P0010 and P0013 will not cause a starting problem. Do you have any other codes? When did the problem start, after a repair?

    For the codes P0010 and P0013, your next step is to check the Camshaft Position (CMP) Actuator Solenoid.

    Reply: https://www.autocodes.com/p...

    Image

    Click here to enlarge image

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play