P0012 2007 Ford Fusion Code - Variable Camshaft Timing Over Retarded Bank 1
Quick Answer
The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for an over-advanced camshaft timing. Common causes include Low or Dirty Engine Oil, Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the VCT piston chamber. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0012 2007 Ford Fusion indicates Variable Camshaft Timing Over Retarded Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the VCT piston chamber.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0012 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0012 2007 Ford Fusion?
- Low or Dirty Engine Oil
- Variable Camshaft Timing solenoid stuck open
- Continuous oil flow to the VCT piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid valve stuck open
- Open or short in the VCT circuit
- Open VPWR circuit
- Camshaft advance mechanism binding (VCT unit)
- Damaged VCT phaser
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0012 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0012 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0012 2007 Ford Fusion code?
Need more information on how to fix the P0012 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0012 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0012 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0012 on a 2007 Ford Fusion?
- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and potential stalling.
2. What does the OBDII code P0012 "Variable Camshaft Timing Over Retarded Bank 1" indicate in a 2007 Ford Fusion?
- This code indicates that the camshaft timing for bank 1 is over-retarded, meaning the timing is too delayed compared to the vehicle's ECM programming.
3. What are the possible causes of OBDII code P0012 on a 2007 Ford Fusion?
- Possible causes include a faulty camshaft position sensor, a malfunctioning variable camshaft timing solenoid, a timing chain issue, or low engine oil levels.
4. How can I diagnose the cause of OBDII code P0012 on my 2007 Ford Fusion?
- Diagnosis typically involves checking the camshaft position sensor, inspecting the variable camshaft timing solenoid, examining the timing chain for wear, and ensuring proper engine oil levels.
5. Can driving with OBDII code P0012 on a 2007 Ford Fusion cause further damage?
- Continuing to drive with this code can potentially lead to engine damage if the underlying issue is not addressed promptly.
6. Is it safe to continue driving my 2007 Ford Fusion with OBDII code P0012 present?
- It is not recommended to drive the vehicle with this code active, as it can affect engine performance and potentially lead to more severe issues.
7. How can I repair OBDII code P0012 on a 2007 Ford Fusion?
- Repair options may include replacing the camshaft position sensor, replacing the variable camshaft timing solenoid, inspecting and potentially replacing the timing chain, and ensuring proper engine oil levels.
8. Can a DIY enthusiast fix OBDII code P0012 on a 2007 Ford Fusion?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address the issue themselves by following repair guides specific to the Ford Fusion model.
9. What is the typical cost to repair OBDII code P0012 on a 2007 Ford Fusion at a professional mechanic or dealership?
- Repair costs can vary but generally range from a few hundred to over a thousand dollars, depending on the specific cause of the code and the parts and labor required.
10. How often does OBDII code P0012 occur in a 2007 Ford Fusion, and is it a common issue?
- While the frequency of this code can vary, it is known to occur in some 2007 Ford Fusion vehicles due to issues related to the camshaft timing components.
Discuss the causes and fixes for P0012 2007 Ford Fusion OBDII Code
Code P0012 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
