P0012 2006 Scion xB Code - Camshaft Position 'A' Timing Over-Retarded Bank 1
Quick Answer
The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. Common causes include Low or Dirty Engine Oil, Faulty variable valve timing (VVT), Faulty oil control valve (OCV). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0012 2006 Scion xB indicates Camshaft Position 'A' Timing Over-Retarded Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty variable valve timing (VVT), Faulty oil control valve (OCV).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0012 2006 Scion xB Description
What are the Possible Causes of the DTC P0012 2006 Scion xB?
- Low or Dirty Engine Oil
- Faulty variable valve timing (VVT)
- Faulty oil control valve (OCV)
- Variable Valve Timing (VVT) harness is open or shorted
- Oil Control Valve (OCV) harness circuit is open or shorted
- Damaged ECM
How to Fix the DTC P0012 2006 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2006 Scion xB Factory Service Bulletin OBDII Code P0012
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0012 2006 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0012 2006 Scion xB code?
Need more information on how to fix the P0012 2006 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0012 2006 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0012 2006 Scion xB Code
1. What are the common symptoms of OBDII code P0012 in a 2006 Scion xB?
- Common symptoms include rough idling, decreased fuel efficiency, engine misfires, and the Check Engine light illuminating.
2. What does the OBDII code P0012 'Camshaft Position 'A' Timing Over-Retarded Bank 1' mean for a 2006 Scion xB?
- This code indicates that the camshaft timing is delayed beyond the acceptable range on Bank 1 of the engine.
3. What are the possible causes of OBDII code P0012 in a 2006 Scion xB?
- Potential causes include a faulty camshaft position sensor, a malfunctioning camshaft phaser, timing chain issues, or low oil pressure.
4. How can I diagnose the OBDII code P0012 in my 2006 Scion xB?
- Diagnosis typically involves using a scan tool to retrieve the code, checking the camshaft position sensor, inspecting the timing chain, and verifying oil pressure.
5. Can driving with OBDII code P0012 in a 2006 Scion xB cause further damage?
- Continuing to drive with this code may lead to engine performance issues and potential damage, so it is recommended to address the underlying cause promptly.
6. What are some repair tips for fixing OBDII code P0012 in a 2006 Scion xB?
- Repair tips may include replacing the camshaft position sensor, inspecting and possibly replacing the timing chain, checking and correcting oil levels, and resetting the code after repairs.
7. Is it safe to reset the OBDII code P0012 in a 2006 Scion xB without fixing the underlying issue?
- It is not recommended to reset the code without addressing the root cause, as the issue may persist and potentially lead to more severe problems down the line.
8. How much does it typically cost to repair OBDII code P0012 in a 2006 Scion xB?
- The cost of repairs can vary depending on the specific cause of the code, but it may range from a few hundred to a thousand dollars, including parts and labor.
9. Are there any recalls or technical service bulletins related to OBDII code P0012 in a 2006 Scion xB?
- It's advisable to check with the manufacturer or a certified dealership to see if there are any relevant recalls or technical service bulletins pertaining to this issue.
10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0012 in a 2006 Scion xB?
- Depending on the specific cause, some DIY repairs may be possible, but it's recommended to consult a professional mechanic for a proper diagnosis and repair to ensure the issue is resolved correctly.
Discuss the causes and fixes for P0012 2006 Scion xB OBDII Code
Code P0012 2006 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
