AutoCodes – Jeep – P0011 Jeep

P0011 Jeep Code - Bank 1 Camshaft 1 Position Target Performance

Quick Answer

The Powertrain Control Module (PC) detects that the actual state of the camshaft position solenoid does not match the intended state. Common causes include Bank 1 Camshaft 1 Position Actuator circuit is open or shorted, Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection, Faulty Camshaft position solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0011 Jeep indicates Bank 1 Camshaft 1 Position Target Performance.
Common causes: Common causes include Bank 1 Camshaft 1 Position Actuator circuit is open or shorted, Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection, Faulty Camshaft position solenoid.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,053

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0011 Jeep Description

The Powertrain Control Module (PC) detects that the actual state of the camshaft position solenoid does not match the intended state.

OBDII Code P0011 Jeep - Bank 1 Camshaft 1 Position Target Performance - AutoCodes.com — P0011 Jeep Code - Bank 1 Camshaft 1 Position Target Performance

What does this mean?

What are the Possible Causes of the DTC P0011 Jeep?

Bank 1 Camshaft 1 Position Actuator circuit is open or shorted
Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection
Faulty Camshaft position solenoid
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0011 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0011 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0011 Jeep code?

Need more information on how to fix the P0011 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0011 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.