P0011 2012 Nissan Rogue Code - Intake Valve Timing Control Performance Bank 1
Quick Answer
This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2012 Nissan Rogue indicates Intake Valve Timing Control Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2012 Nissan Rogue Description
The ECM receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in low/mid speed range and output in high-speed range.
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0011 2012 Nissan Rogue?
- Low or Dirty Engine Oil
- Faulty Intake Valve Timing Control Solenoid Valve
- Intake Valve Timing Control Solenoid Valve harness is open or shorted
- Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Crankshaft Position Sensor (POS)
How to Fix the DTC P0011 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2012 Nissan Rogue code?
Need more information on how to fix the P0011 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2012 Nissan Rogue Code
1. What does OBDII code P0011 on a 2012 Nissan Rogue mean?
This code indicates an issue with the Intake Valve Timing Control Performance on Bank 1 of the engine.
2. What are the common symptoms of OBDII code P0011 in a 2012 Nissan Rogue?
Common symptoms include rough idling, reduced engine performance, and potentially poor fuel efficiency.
3. What are the possible causes of OBDII code P0011 on a 2012 Nissan Rogue?
Potential causes include a faulty Intake Valve Timing Control Solenoid, engine oil issues, timing chain problems, or wiring issues.
4. How can I diagnose the cause of OBDII code P0011 on my 2012 Nissan Rogue?
Diagnosis typically involves checking the Intake Valve Timing Control Solenoid, inspecting the timing chain, and ensuring proper engine oil levels and quality.
5. Can driving with OBDII code P0011 on a 2012 Nissan Rogue cause further damage?
Continuing to drive with this code may lead to potential damage to the engine components, so it's advisable to address the issue promptly.
6. How can I repair OBDII code P0011 on my 2012 Nissan Rogue?
Repair may involve replacing the Intake Valve Timing Control Solenoid, addressing any engine oil issues, fixing timing chain problems, or repairing wiring faults.
7. Is it safe to reset the OBDII code P0011 on a 2012 Nissan Rogue without fixing the underlying issue?
Resetting the code without addressing the root cause may temporarily turn off the check engine light, but the problem will likely resurface.
8. Can a DIY enthusiast fix OBDII code P0011 on a 2012 Nissan Rogue?
Depending on the skill level and access to tools, some DIY enthusiasts may be able to address this code themselves, especially if the issue is with the Intake Valve Timing Control Solenoid.
9. How much does it typically cost to repair OBDII code P0011 on a 2012 Nissan Rogue at a mechanic or dealership?
Costs can vary depending on the specific cause of the code, but repairs related to the Intake Valve Timing Control system can range from $200 to $600 or more.
10. How often does OBDII code P0011 occur in 2012 Nissan Rogues?
While not extremely common, this code can occur in 2012 Nissan Rogues due to various factors such as age, mileage, and maintenance history.
Discuss the causes and fixes for P0011 2012 Nissan Rogue OBDII Code
Code P0011 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
