AutoCodes – Toyota – P0011 2010 Toyota Camry

P0011 2010 Toyota Camry Code - Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1

Quick Answer

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. Common causes include Low or Dirty Engine Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0011 2010 Toyota Camry indicates Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1.
Common causes: Common causes include Low or Dirty Engine Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,610

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0011 2010 Toyota Camry Description

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.

OBDII Code P0011 2010 Toyota Camry - Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1 - AutoCodes.com — P0011 2010 Toyota Camry Code - Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1

What does this mean?

What are the Possible Causes of the DTC P0011 2010 Toyota Camry?

Low or Dirty Engine Oil
Variable Valve Timing (VVT) circuit is open or shorted
Oil Control Valve (OCV) circuit is open or shorted
Faulty variable valve timing (VVT)
Faulty oil control valve (OCV)
Damaged ECM

How to Fix the DTC P0011 2010 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0011 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0011 2010 Toyota Camry code?

Need more information on how to fix the P0011 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0011 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0011 2010 Toyota Camry Code

1. What are the common symptoms of OBDII code P0011 on a 2010 Toyota Camry?

- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and potentially stalling.

2. What are the possible causes of OBDII code P0011 on a 2010 Toyota Camry?

- The code may be triggered by issues such as a faulty camshaft position sensor, a malfunctioning variable valve timing (VVT) solenoid, or incorrect engine oil viscosity.

3. How serious is OBDII code P0011 on a 2010 Toyota Camry?

- While the vehicle may still be operable with this code, it is important to address it promptly to prevent potential damage to the engine and ensure optimal performance.

4. Can I continue driving my 2010 Toyota Camry with OBDII code P0011?

- It is not recommended to drive the vehicle extensively with this code present, as it can lead to further engine problems if left unresolved.

5. How can I diagnose OBDII code P0011 on my 2010 Toyota Camry?

- Diagnosing this code typically involves checking the camshaft position sensor, inspecting the VVT solenoid, and verifying the engine oil level and condition.

6. What are some repair tips for fixing OBDII code P0011 on a 2010 Toyota Camry?

- Repair tips may include replacing the camshaft position sensor, cleaning or replacing the VVT solenoid, ensuring the correct engine oil viscosity, and performing a thorough inspection of related components.

7. Will resetting the OBDII code P0011 on a 2010 Toyota Camry make it go away permanently?

- Simply resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to reappear.

8. How much does it typically cost to repair OBDII code P0011 on a 2010 Toyota Camry?

- Repair costs can vary depending on the specific cause of the code, but they may range from a few hundred to over a thousand dollars, including parts and labor.

9. Can a DIY enthusiast fix OBDII code P0011 on a 2010 Toyota Camry?

- While some aspects of diagnosing and repairing this code can be tackled by DIY enthusiasts, certain repairs may require specialized tools or professional expertise.

10. How long does it take to repair OBDII code P0011 on a 2010 Toyota Camry?

- The repair time can vary based on the exact cause of the code and the complexity of the fix, but it may take anywhere from a few hours to a full day at a repair shop.