P0011 2008 Nissan Versa Code - Intake Valve Timing Control Performance Bank 1
Quick Answer
This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2008 Nissan Versa indicates Intake Valve Timing Control Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2008 Nissan Versa Description
The ECM receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in low/mid speed range and output in high-speed range.
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0011 2008 Nissan Versa?
- Low or Dirty Engine Oil
- Faulty Intake Valve Timing Control Solenoid Valve
- Intake Valve Timing Control Solenoid Valve harness is open or shorted
- Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Crankshaft Position Sensor (POS)
How to Fix the DTC P0011 2008 Nissan Versa?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2008 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2008 Nissan Versa code?
Need more information on how to fix the P0011 2008 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2008 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2008 Nissan Versa Code
1. What are the common symptoms of OBDII code P0011 in a 2008 Nissan Versa?
- Common symptoms include rough idling, poor acceleration, engine misfires, and a noticeable decrease in fuel efficiency.
2. What does the OBDII code P0011 "Intake Valve Timing Control Performance Bank 1" mean for a 2008 Nissan Versa?
- This code indicates that there is an issue with the intake valve timing control on bank 1, which can affect the engine's performance.
3. What are the possible causes of OBDII code P0011 in a 2008 Nissan Versa?
- Possible causes include a faulty intake valve timing control solenoid, issues with the camshaft or crankshaft position sensors, timing chain problems, or low engine oil levels.
4. How can I diagnose the OBDII code P0011 in my 2008 Nissan Versa?
- Diagnosing this code may involve checking the intake valve timing control solenoid, inspecting the timing chain, testing the camshaft and crankshaft position sensors, and ensuring proper engine oil levels.
5. Can driving with OBDII code P0011 in a 2008 Nissan Versa cause further damage?
- Continuing to drive with this code may lead to engine performance issues and potentially cause damage to other engine components over time.
6. How can I repair OBDII code P0011 in my 2008 Nissan Versa?
- Repairing this code typically involves replacing the faulty intake valve timing control solenoid, addressing any timing chain issues, and ensuring the proper functioning of camshaft and crankshaft position sensors.
7. Is it safe to continue driving my 2008 Nissan Versa with OBDII code P0011?
- It is not recommended to drive the vehicle with this code present, as it can lead to decreased engine performance and potential long-term damage.
8. Can resetting the OBDII code P0011 in a 2008 Nissan Versa fix the issue?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the code to appear.
9. How much does it typically cost to repair OBDII code P0011 in a 2008 Nissan Versa?
- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Will OBDII code P0011 in a 2008 Nissan Versa affect the vehicle's emissions?
- Yes, this code can impact the vehicle's emissions output, potentially causing it to fail emissions tests if not addressed promptly.
Discuss the causes and fixes for P0011 2008 Nissan Versa OBDII Code
Code P0011 2008 Nissan Versa comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
