P0011 2008 Nissan Maxima Code - Intake Valve Timing Control Performance Bank 1
Quick Answer
This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2008 Nissan Maxima indicates Intake Valve Timing Control Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2008 Nissan Maxima Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through the intake valve timing control unit or stops oil flow. The longer pulse width advances the valve angle. The shorter pulse width retards the valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0011 2008 Nissan Maxima?
- Low or Dirty Engine Oil
- Faulty Intake Valve Timing Control Solenoid Valve
- Intake Valve Timing Control Solenoid Valve harness is open or shorted
- Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Crankshaft Position Sensor (POS)
How to Fix the DTC P0011 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2008 Nissan Maxima code?
Need more information on how to fix the P0011 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2008 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0011 on a 2008 Nissan Maxima?
- Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and potentially stalling.
2. What does the OBDII code P0011 for a 2008 Nissan Maxima mean?
- This code indicates an issue with the Intake Valve Timing Control Performance on Bank 1 of the engine.
3. What are the possible causes of OBDII code P0011 on a 2008 Nissan Maxima?
- Potential causes include a faulty Intake Valve Timing Control solenoid, dirty engine oil, camshaft position sensor issues, or a timing chain problem.
4. How serious is OBDII code P0011 on a 2008 Nissan Maxima?
- While the car may still be drivable with this code, it is essential to address the underlying issue promptly to prevent further damage to the engine.
5. Can I continue to drive my 2008 Nissan Maxima with OBDII code P0011?
- It is not recommended to drive the vehicle for an extended period with this code as it can lead to more severe engine problems over time.
6. How can I diagnose OBDII code P0011 on my 2008 Nissan Maxima?
- Diagnosis typically involves checking the Intake Valve Timing Control solenoid, inspecting the camshaft position sensor, and verifying the engine oil condition.
7. What is the typical repair for OBDII code P0011 on a 2008 Nissan Maxima?
- Repairs often involve replacing the Intake Valve Timing Control solenoid, cleaning or replacing the camshaft position sensor, and ensuring proper engine oil maintenance.
8. Can I reset the OBDII code P0011 on my 2008 Nissan Maxima without fixing the issue?
- While you can clear the code with an OBDII scanner, it is crucial to address the underlying problem to prevent recurring issues and potential engine damage.
9. How much does it cost to repair OBDII code P0011 on a 2008 Nissan Maxima?
- The repair costs can vary depending on the specific issue causing the code, but it may range from a couple of hundred dollars to over a thousand for more extensive repairs.
10. How can I prevent OBDII code P0011 from reoccurring on my 2008 Nissan Maxima?
- To prevent the code from coming back, ensure regular maintenance, timely oil changes, and address any issues related to the Intake Valve Timing Control system promptly.
Discuss the causes and fixes for P0011 2008 Nissan Maxima OBDII Code
-
P0011 and P0021: Quick question: Would having extremely low oil cause these codes? Its really odd to get both banks at the same time so I doubt both VVT solenoids would go at the exact time...
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
