P0011 2005 Scion xB Code - Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1
Quick Answer
The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. Common causes include Low or Dirty Engine Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2005 Scion xB indicates Camshaft Position 'A' Timing Over-Advanced or System Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2005 Scion xB Description
What are the Possible Causes of the DTC P0011 2005 Scion xB?
- Low or Dirty Engine Oil
- Variable Valve Timing (VVT) circuit is open or shorted
- Oil Control Valve (OCV) circuit is open or shorted
- Faulty variable valve timing (VVT)
- Faulty oil control valve (OCV)
- Damaged Engine Control Module (ECM)
How to Fix the DTC P0011 2005 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2005 Scion xB Factory Service Bulletin OBDII Code P0011
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2005 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2005 Scion xB code?
Need more information on how to fix the P0011 2005 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2005 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2005 Scion xB Code
1. What are the common symptoms of OBDII code P0011 in a 2005 Scion xB?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and difficulty starting the vehicle.
2. What are some possible causes of the P0011 code in a 2005 Scion xB?
- Potential causes include a faulty camshaft position sensor, malfunctioning variable valve timing (VVT) solenoid, engine oil issues, or a timing chain/belt problem.
3. How can I diagnose the cause of the P0011 code in my 2005 Scion xB?
- Diagnosing the issue may involve checking the camshaft position sensor, inspecting the VVT solenoid, verifying proper engine oil levels and condition, and examining the timing chain/belt for wear or damage.
4. Can driving with the P0011 code present cause further damage to my 2005 Scion xB?
- Continuing to drive with the code present can potentially lead to engine damage due to incorrect camshaft timing, so it's advisable to address the issue promptly.
5. What is the typical repair process for resolving the P0011 code in a 2005 Scion xB?
- The repair process may involve replacing the camshaft position sensor, VVT solenoid, addressing engine oil issues, or repairing/replacing the timing chain/belt as needed.
6. Are there any DIY tips for fixing the P0011 code in a 2005 Scion xB?
- DIY enthusiasts may be able to tackle the repair by following step-by-step guides or videos specific to their vehicle model, but it's recommended to have some mechanical experience.
7. How much does it usually cost to repair the P0011 code in a 2005 Scion xB at a mechanic or dealership?
- Repair costs can vary depending on the specific cause of the code, but typically range from $200 to $800 at a mechanic or dealership.
8. Will resetting the OBDII code temporarily resolve the P0011 issue in my 2005 Scion xB?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed, it is likely to reappear.
9. Can a faulty VVT solenoid be cleaned or repaired, or does it need to be replaced?
- In many cases, a faulty VVT solenoid will need to be replaced rather than cleaned or repaired to ensure proper functionality and prevent future issues.
10. Is it safe to drive my 2005 Scion xB with the P0011 code if the engine is running smoothly?
- Even if the engine is running smoothly, it's not recommended to drive with the P0011 code present as it can lead to potential long-term engine damage if left unresolved.
Discuss the causes and fixes for P0011 2005 Scion xB OBDII Code
-
This isn't my car, it's my wife's friends car so I don't know anything about it. I just know that it threw two codes P0011 and P0016. I know P0016 is a cam sensor fault and P0011 has to do with the VVT. Can you help me get a maybe parts list to fix these problems?
-
Before replacing any sensors, you could start by changing then engine oil. Dirty or low engine oil could trigger the P0011 and P0016 codes.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
