P0010 2017 Chevrolet Silverado Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1
Quick Answer
The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0010 2017 Chevrolet Silverado indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0010 2017 Chevrolet Silverado Description
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open solenoid circuit in the CMP actuator for greater than 1 second or a cumulative of 5 seconds when the solenoid is commanded OFF.
The ECM monitors the control circuit of the CMP actuator solenoid for electrical faults. The ECM can determine if a control circuit is open, shorted high, or shorted low. If the ECM detects a fault with the CMP actuator solenoid control, DTC P0010 will set.
What are the Possible Causes of the DTC P0010 2017 Chevrolet Silverado?
- Dirty Oil
- Low engine oil level
- Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1
- Intake Camshaft Position Actuator Solenoid Valve Bank 1 harness is open or shorted
- Intake Camshaft Position Actuator Solenoid Valve Bank 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0010 2017 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0010 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0010 2017 Chevrolet Silverado code?
Need more information on how to fix the P0010 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0010 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0010 2017 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P0010 in a 2017 Chevrolet Silverado?
The common symptoms of code P0010 include rough idling, decreased fuel efficiency, engine misfires, and possibly stalling.
2. What does the OBDII code P0010 indicate in a 2017 Chevrolet Silverado?
Code P0010 indicates a potential issue with the Intake Camshaft Position Actuator Solenoid Valve Control Circuit in Bank 1 of the engine.
3. What are the possible causes of OBDII code P0010 in a 2017 Chevrolet Silverado?
Possible causes of code P0010 include a faulty camshaft position actuator solenoid, wiring issues, low engine oil levels, or engine timing problems.
4. How can I diagnose OBDII code P0010 in my 2017 Chevrolet Silverado?
Diagnosing code P0010 typically involves checking the camshaft position actuator solenoid, inspecting wiring for damage, verifying engine oil levels, and ensuring proper engine timing.
5. Can I continue driving my 2017 Chevrolet Silverado with OBDII code P0010?
It is not recommended to continue driving with code P0010 as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
6. How can I repair OBDII code P0010 in my 2017 Chevrolet Silverado?
Repairing code P0010 may involve replacing the camshaft position actuator solenoid, repairing damaged wiring, ensuring proper engine oil levels, or correcting engine timing issues.
7. Can a DIY enthusiast fix OBDII code P0010 in a 2017 Chevrolet Silverado?
Depending on the skill level and tools available, a DIY enthusiast may be able to address code P0010 by following repair guides and using proper diagnostic equipment.
8. Is it necessary to reset the OBDII code P0010 after repairs in a 2017 Chevrolet Silverado?
Yes, it is recommended to reset the OBDII code P0010 after completing repairs to see if the issue has been successfully resolved and to clear the fault code from the system.
9. Will OBDII code P0010 cause permanent damage to my 2017 Chevrolet Silverado if left unresolved?
Leaving code P0010 unresolved can potentially cause further engine damage over time, so it's essential to address the issue promptly to avoid costly repairs.
10. How can I prevent OBDII code P0010 from reoccurring in my 2017 Chevrolet Silverado?
To prevent code P0010 from reoccurring, regularly check engine oil levels, perform routine maintenance, and address any potential issues with the camshaft position actuator solenoid promptly.
Discuss the causes and fixes for P0010 2017 Chevrolet Silverado OBDII Code
Code P0010 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
