P0010 2016 GMC Sierra Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1
Quick Answer
The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0010 2016 GMC Sierra indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0010 2016 GMC Sierra Description
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open solenoid circuit in the CMP actuator for greater than 1 second or a cumulative of 5 seconds when the solenoid is commanded OFF.
The ECM monitors the control circuit of the CMP actuator solenoid for electrical faults. The ECM can determine if a control circuit is open, shorted high, or shorted low. If the ECM detects a fault with the CMP actuator solenoid control, DTC P0010 will set.
What are the Possible Causes of the DTC P0010 2016 GMC Sierra?
- Dirty Oil
- Low engine oil level
- Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1
- Intake Camshaft Position Actuator Solenoid Valve Bank 1 harness is open or shorted
- Intake Camshaft Position Actuator Solenoid Valve Bank 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0010 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0010 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0010 2016 GMC Sierra code?
Need more information on how to fix the P0010 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0010 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0010 2016 GMC Sierra Code
1. What does OBDII code P0010 on a 2016 GMC Sierra mean?
The code P0010 indicates an issue with the Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1.
2. What are the common symptoms of a P0010 code in a 2016 GMC Sierra?
Common symptoms include rough idling, decreased fuel efficiency, engine misfires, and in some cases, the Check Engine light may illuminate.
3. What causes the P0010 OBDII code in a 2016 GMC Sierra?
The P0010 code is often triggered by a faulty intake camshaft position actuator solenoid, wiring issues, low engine oil levels, or a malfunctioning engine control module (ECM).
4. How can I diagnose the P0010 code on my 2016 GMC Sierra?
Diagnosing the P0010 code involves checking the intake camshaft position actuator solenoid, inspecting the wiring and connectors for any damage, verifying proper oil levels, and testing the ECM for functionality.
5. Can I still drive my 2016 GMC Sierra with a P0010 code?
It is not recommended to drive your vehicle with a P0010 code as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
6. How much does it cost to repair a P0010 code on a 2016 GMC Sierra?
The cost of repairing a P0010 code can vary depending on the exact cause of the issue. It may involve replacing the intake camshaft position actuator solenoid, repairing wiring, or addressing other underlying problems.
7. Can I repair the P0010 code in my 2016 GMC Sierra myself?
While some DIY enthusiasts may be able to address simple causes like wiring issues, diagnosing and repairing the P0010 code often requires specialized tools and expertise. It's recommended to consult a professional mechanic.
8. Will resetting the OBDII code P0010 on my 2016 GMC Sierra make it go away?
Resetting the code may temporarily clear the Check Engine light, but if the underlying issue causing the P0010 code is not addressed, the code is likely to reappear.
9. Is the P0010 code a common problem in 2016 GMC Sierra vehicles?
The P0010 code related to the Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1 is a known issue in GMC Sierra vehicles and can occur due to various factors.
10. How important is it to fix the P0010 code on a 2016 GMC Sierra promptly?
It is crucial to address the P0010 code promptly to prevent potential engine damage, ensure optimal performance, and maintain the overall health of your 2016 GMC Sierra.
Discuss the causes and fixes for P0010 2016 GMC Sierra OBDII Code
Code P0010 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
