P0008 Code - Engine Positions System Performance Bank 1
Quick Answer
The Engine Control Module (ECM) monitors the position of both camshafts and the crankshaft. Common causes include Engine mechanical problems, Incorrect timing chain, Stretched timing chain. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0008 indicates Engine Positions System Performance Bank 1.
- Common causes
- Common causes include Engine mechanical problems, Incorrect timing chain, Stretched timing chain.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0008 Description
What are the Possible Causes of the DTC P0008?
- Engine mechanical problems
- Incorrect timing chain
- Stretched timing chain
- Failed camshaft actuator or actuator solenoid
How to Fix the DTC P0008?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0008 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0008 code?
Need more information on how to fix the P0008 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0008 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0008 Buick — Engine Positions System Performance Bank 1
- P0008 Cadillac — Engine Positions System Performance Bank 1
- P0008 Chevrolet — Engine Positions System Performance Bank 1
- P0008 GMC — Engine Positions System Performance Bank 1
- P0008 Pontiac — Engine Positions System Performance Bank 1
- P0008 Saturn — Engine Positions System Performance Bank 1
- P0008 Suzuki — Engine Positions System Performance Bank 1
Frequently Asked Questions about P0008 Code
1. What are the common symptoms of OBDII code P0008?
- Common symptoms include rough idling, engine misfires, poor acceleration, and decreased fuel efficiency.
2. What does OBDII code P0008 indicate?
- OBDII code P0008 indicates an issue with the Engine Positions System Performance in Bank 1 of the engine.
3. What are the possible causes of OBDII code P0008?
- Possible causes include a faulty camshaft position actuator, timing chain issues, engine mechanical problems, or a malfunctioning engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0008?
- Diagnosis typically involves checking the camshaft position actuator, inspecting the timing chain for wear or slack, performing a compression test, and scanning the ECM for fault codes.
5. Can I drive my vehicle with OBDII code P0008?
- It is not recommended to drive your vehicle with OBDII code P0008, as it can lead to further engine damage and potential safety hazards.
6. How do I repair OBDII code P0008?
- Repairing OBDII code P0008 may involve replacing the camshaft position actuator, repairing or replacing the timing chain, addressing any engine mechanical issues, or reprogramming the ECM.
7. Will resetting the OBDII code P0008 make it go away permanently?
- Resetting the code without addressing the underlying issue will not make it go away permanently. It is important to diagnose and repair the root cause of the problem.
8. Can a DIY enthusiast fix OBDII code P0008?
- While some aspects of diagnosing and repairing OBDII code P0008 can be done by a DIY enthusiast, certain repairs may require professional tools and expertise, especially when dealing with engine mechanical issues.
9. How much does it cost to repair OBDII code P0008?
- The cost of repairing OBDII code P0008 can vary depending on the underlying issue, parts needed, labor costs, and whether you choose to go to a dealership or an independent mechanic.
10. Is it important to address OBDII code P0008 immediately?
- Yes, it is important to address OBDII code P0008 immediately to prevent further damage to the engine and ensure the safe operation of your vehicle.
Discuss the causes and fixes for P0008 OBDII Code
-
Got the p0008 code, replaced the ECM in my 05 cadi. Got it back from dealer, check eng light on and same code p0008?? What next to do?
-
Take it back to the dealer. If they replaced the ECM for the P0008 code, then they have to be responsible if the code comes back. You paid to fix the P0008 code and that din't fix the problem.
-
p0008 comes out to yuchai engine yc6l euro 3,.not running,.newly overhauled engine,.it is the timing incorrect?,.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
