P0006 Code - Fuel Shutoff Valve 'A' Control Circuit Low
Quick Answer
This Diagnostic Trouble Code (DTC) is stored if a fault is detected with the Fuel Shutoff Valve control circuit. Common causes include Faulty Injector Pump Stop Solenoid, Injector Pump Stop Solenoid harness is open or shorted, Injector Pump Stop Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0006 indicates Fuel Shutoff Valve 'A' Control Circuit Low.
- Common causes
- Common causes include Faulty Injector Pump Stop Solenoid, Injector Pump Stop Solenoid harness is open or shorted, Injector Pump Stop Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0006 Description
What are the Possible Causes of the DTC P0006?
- Faulty Injector Pump Stop Solenoid
- Injector Pump Stop Solenoid harness is open or shorted
- Injector Pump Stop Solenoid circuit poor electrical connection
How to Fix the DTC P0006?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0006 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0006 code?
Need more information on how to fix the P0006 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0006 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0006 Mercedes-Benz — Fuel Shutoff Valve 'A' Control Circuit Low
Frequently Asked Questions about P0006 Code
1. What are the common symptoms of OBDII code P0006?
- Common symptoms include engine misfires, rough idling, reduced engine performance, and difficulty starting the vehicle.
2. What causes the OBDII code P0006 to trigger?
- The code P0006 is typically triggered by a malfunction in the fuel shutoff valve 'A' control circuit, which may be due to wiring issues, a faulty fuel shutoff valve, or a problem with the engine control module.
3. How can I diagnose the cause of OBDII code P0006?
- Diagnosing the cause of code P0006 involves conducting a thorough inspection of the fuel shutoff valve, checking the wiring for any damage or loose connections, and using a scan tool to analyze the circuit performance.
4. Can a faulty fuel shutoff valve be repaired, or does it need to be replaced?
- In most cases, a faulty fuel shutoff valve will need to be replaced rather than repaired to ensure proper functioning and prevent future issues with the vehicle's fuel system.
5. Are there any DIY repair tips for addressing OBDII code P0006?
- DIY repair tips include checking and cleaning the fuel shutoff valve connector, inspecting the wiring for any visible damage, and ensuring all connections are secure before considering replacing the valve or seeking professional help.
6. What are the potential risks of ignoring OBDII code P0006?
- Ignoring OBDII code P0006 can lead to decreased fuel efficiency, engine performance issues, and potential damage to the vehicle's engine components over time if the underlying problem is not addressed promptly.
7. How much does it typically cost to repair OBDII code P0006?
- The cost of repairing OBDII code P0006 can vary depending on the extent of the issue, the need for parts replacement, and whether the repair is done professionally or as a DIY project. Costs can range from a few hundred dollars to over a thousand dollars.
8. Can OBDII code P0006 be related to other engine problems?
- Yes, OBDII code P0006 can be related to other engine problems, such as fuel system issues, ignition system malfunctions, or problems with the engine control module. It is important to address all related issues to ensure the vehicle's overall performance and reliability.
9. Is it safe to drive with OBDII code P0006 present in the vehicle?
- It is generally not recommended to drive with OBDII code P0006 present, as it can lead to engine performance issues and potential safety hazards on the road. It is best to address the problem promptly to prevent further damage.
10. How long does it typically take to repair OBDII code P0006?
- The repair time for OBDII code P0006 can vary depending on the specific cause of the issue, the availability of parts, and whether the repair is done by a professional or as a DIY project. Repairs can range from a few hours to a full day or more.
Discuss the causes and fixes for P0006 OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
