AutoCodes – Generic – P0005

P0005 Code - Fuel Shutoff Valve 'A' Control Circuit/Open

Quick Answer

The Engine Control Module (ECM) monitors the Fuel Shutoff Valve 'A' Control Circuit. Common causes include Faulty Fuel Shutoff Valve 'A', Fuel Shutoff Valve 'A' harness is open or shorted, Fuel Shutoff Valve 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0005 indicates Fuel Shutoff Valve 'A' Control Circuit/Open.
Common causes
Common causes include Faulty Fuel Shutoff Valve 'A', Fuel Shutoff Valve 'A' harness is open or shorted, Fuel Shutoff Valve 'A' circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 34,759
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0005 Description

The Engine Control Module (ECM) monitors the Fuel Shutoff Valve 'A' Control Circuit. The ECM sets the OBDII code when the Fuel Shutoff Valve 'A' Control Circuit is out of factory specifications.
OBDII Code P0005 - Fuel Shutoff Valve 'A' Control Circuit/Open - AutoCodes.com
P0005 Code - Fuel Shutoff Valve 'A' Control Circuit/Open

What are the Possible Causes of the DTC P0005?

  • Faulty Fuel Shutoff Valve 'A'
  • Fuel Shutoff Valve 'A' harness is open or shorted
  • Fuel Shutoff Valve 'A' circuit poor electrical connection

How to Fix the DTC P0005?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0005 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0005 code?

Need more information on how to fix the P0005 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0005 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0005 Code

1. What are the common symptoms of OBDII code P0005?

- Common symptoms of code P0005 include difficulty starting the engine, reduced fuel efficiency, rough idling, and stalling.

2. What causes the Fuel Shutoff Valve 'A' Control Circuit/Open fault (P0005)?

- The P0005 code is typically triggered by issues such as a faulty fuel shutoff valve, damaged wiring or connectors in the control circuit, or a malfunctioning powertrain control module (PCM).

3. How can I diagnose the cause of OBDII code P0005?

- To diagnose the cause of P0005, you can perform a visual inspection of the fuel shutoff valve and its wiring, conduct a continuity test on the circuit, and use a scan tool to analyze the PCM data for any anomalies.

4. Is it safe to drive with OBDII code P0005 active?

- It is generally not recommended to drive with code P0005 present, as it can lead to engine performance issues and potential safety hazards. It is best to address the underlying problem promptly.

5. How can I repair OBDII code P0005?

- Repairing code P0005 involves identifying and addressing the root cause, which may include replacing the faulty fuel shutoff valve, repairing damaged wiring, or reprogramming the PCM if necessary.

6. Can a DIY enthusiast fix OBDII code P0005 at home?

- Depending on your experience level and access to tools, some DIY enthusiasts may be able to address code P0005 at home by following repair guides and utilizing diagnostic equipment.

7. Will resetting the OBDII system clear code P0005?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.

8. How much does it cost to repair OBDII code P0005 at a mechanic?

- The cost of repairing P0005 at a mechanic can vary based on the specific cause of the issue, labor rates, and the cost of parts. It is advisable to obtain quotes from different mechanics.

9. Are there any preventive measures to avoid OBDII code P0005 in the future?

- Regular maintenance, such as checking and cleaning fuel system components, inspecting wiring for wear, and ensuring proper electrical connections, can help prevent issues that trigger code P0005.

10. Can a faulty fuel shutoff valve cause other OBDII codes besides P0005?

- Yes, a faulty fuel shutoff valve can lead to other related codes such as P0004 (Fuel Volume Regulator Control Circuit High) or P0006 (Fuel Shutoff Valve 'A' Control Circuit Low).

Discuss the causes and fixes for P0005 OBDII Code

  • I have a 2003 Dodge Stratus 2.4l DOHC that cut off while driving 48mph,when i try and crank it the check engine light flashes after no start conditions 5 times,what does it means? can anybody HELP?.

  • You should check what code is stored in the Engine Control Module (ECM). With the code you will able to properly diagnose the problem.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play