AutoCodes – Subaru – C2514 Subaru

C2514 Subaru Code - Torque Sensor 4 Failure

Quick Answer

The Electric Power Steering Control Module monitors the Torque Sensor 4. Common causes include Faulty Torque Sensor 4, Torque Sensor 4 harness is open or shorted, Torque Sensor 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2514 Subaru indicates Torque Sensor 4 Failure.
Common causes: Common causes include Faulty Torque Sensor 4, Torque Sensor 4 harness is open or shorted, Torque Sensor 4 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,075

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2514 Subaru Description

The Electric Power Steering Control Module monitors the Torque Sensor 4. The Electric Power Steering Control Module sets the OBDII code when the Torque Sensor 4 is not to factory specifications.

OBDII Code C2514 Subaru - Torque Sensor 4 Failure - AutoCodes.com — C2514 Subaru Code - Torque Sensor 4 Failure

What does this mean?

What are the Possible Causes of the DTC C2514 Subaru?

Faulty Torque Sensor 4
Torque Sensor 4 harness is open or shorted
Torque Sensor 4 circuit poor electrical connection
Faulty Electric Power Steering Control Module

How to Fix the DTC C2514 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2514 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2514 Subaru code?

Need more information on how to fix the C2514 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2514 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2514 Subaru Code

1. What are common symptoms of OBDII code C2514 Subaru (Torque Sensor 4 Failure)?

- Common symptoms include issues with the vehicle's stability control, traction control, or power steering system. The steering wheel may feel heavy or difficult to turn.

2. What can cause the OBDII code C2514 Subaru to appear?

- The code C2514 usually indicates a failure in the torque sensor 4 within the power steering system. This failure can be caused by sensor malfunctions, wiring issues, or power steering system failures.

3. How serious is the OBDII code C2514 Subaru (Torque Sensor 4 Failure)?

- This code can affect the vehicle's stability and control systems, so it is important to address it promptly to ensure safe driving conditions.

4. Can I continue driving my Subaru with the OBDII code C2514?

- It is not recommended to continue driving the vehicle with this code present, as it can impact the performance of the power steering system and overall driving safety.

5. What are some DIY repair tips for OBDII code C2514 Subaru?

- DIY repair for this code may involve checking the torque sensor and its wiring connections. However, due to the complexity of the power steering system, it is advisable to consult a professional mechanic for accurate diagnosis and repair.

6. How much does it typically cost to repair OBDII code C2514 Subaru?

- The cost of repairing this code can vary depending on the extent of the issue and the specific repairs needed. It is recommended to get a diagnostic assessment from a qualified mechanic to determine the exact cost.

7. Can resetting the OBDII code C2514 Subaru temporarily fix the issue?

- Resetting the code may temporarily clear the fault, but it is not a permanent solution. The underlying issue causing the torque sensor 4 failure should be properly diagnosed and repaired to ensure safe and reliable vehicle operation.

8. Is the OBDII code C2514 Subaru specific to certain Subaru models?

- This code is typically specific to Subaru vehicles equipped with OBDII systems and advanced stability control features that monitor torque sensor data.

9. How does the torque sensor 4 failure affect the vehicle's drivability?

- A torque sensor 4 failure can lead to compromised power steering assistance and stability control, impacting the vehicle's handling and drivability, especially during maneuvers and at higher speeds.

10. Can a faulty torque sensor 4 lead to other issues in the vehicle?

- Yes, a faulty torque sensor 4 can potentially cause related issues in the vehicle's power steering system, stability control, and overall handling, making it essential to address the problem promptly to prevent further complications.