C2511 Subaru Code - Torque Sensor 1 Failure
Quick Answer
The Electric Power Steering Control Module monitors the Torque Sensor 1. Common causes include Faulty Torque Sensor 1, Torque Sensor 1 harness is open or shorted, Torque Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2511 Subaru indicates Torque Sensor 1 Failure.
- Common causes
- Common causes include Faulty Torque Sensor 1, Torque Sensor 1 harness is open or shorted, Torque Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2511 Subaru Description
What are the Possible Causes of the DTC C2511 Subaru?
- Faulty Torque Sensor 1
- Torque Sensor 1 harness is open or shorted
- Torque Sensor 1 circuit poor electrical connection
- Faulty Electric Power Steering Control Module
How to Fix the DTC C2511 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2511 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2511 Subaru code?
Need more information on how to fix the C2511 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2511 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2511 Subaru Code
1. What are the common symptoms of OBDII code C2511 Subaru - Torque Sensor 1 Failure?
The common symptoms of this code may include issues with the vehicle's stability control system, difficulty steering, and warning lights on the dashboard.
2. What are the possible causes of OBDII code C2511 Subaru - Torque Sensor 1 Failure?
Possible causes of this code can include a faulty torque sensor, damaged wiring in the steering system, or a malfunctioning control module.
3. How can I diagnose OBDII code C2511 Subaru - Torque Sensor 1 Failure?
Diagnosis typically involves using a diagnostic scanner to retrieve the fault codes, conducting a visual inspection of the steering components, and testing the torque sensor for proper operation.
4. Can I still drive my Subaru with OBDII code C2511 - Torque Sensor 1 Failure?
It is not recommended to drive the vehicle with this code present, as it can affect the vehicle's steering and stability control systems, potentially compromising safety.
5. How can I repair OBDII code C2511 Subaru - Torque Sensor 1 Failure?
Repairing this code may involve replacing the torque sensor, repairing any damaged wiring, or reprogramming the control module to resolve the issue.
6. Will resetting the fault codes make OBDII code C2511 Subaru - Torque Sensor 1 Failure go away?
Resetting the fault codes may temporarily clear the warning lights, but the underlying issue causing the code will likely reappear unless properly diagnosed and repaired.
7. How much does it cost to fix OBDII code C2511 Subaru - Torque Sensor 1 Failure?
The cost of fixing this code can vary depending on the specific cause of the issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.
8. Can a DIY enthusiast repair OBDII code C2511 Subaru - Torque Sensor 1 Failure?
While some experienced DIY enthusiasts may be able to diagnose and repair this code themselves, due to the complexity of steering and stability control systems, it is recommended to seek professional help.
9. How long does it take to repair OBDII code C2511 Subaru - Torque Sensor 1 Failure?
The repair time for this code can vary depending on the extent of the issue and the availability of parts, but it may take several hours to a full day to complete the repair.
10. Is OBDII code C2511 Subaru - Torque Sensor 1 Failure a common issue in Subaru vehicles?
While not extremely common, issues with torque sensors and steering systems can occur in Subaru vehicles, particularly in models equipped with advanced safety and stability control features.
Discuss the causes and fixes for C2511 Subaru OBDII Code
Code C2511 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
