AutoCodes – Chrysler – C2508 Chrysler

C2508 Chrysler Code - Engine Max Torque

Quick Answer

The Drivetrain Control Module (DTCM) monitors the Engine Max Torque Signal. Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2508 Chrysler indicates Engine Max Torque.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 976

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2508 Chrysler Description

The Drivetrain Control Module (DTCM) monitors the Engine Max Torque Signal. The DTCM sets the OBDII code when the Engine Max Torque Signal is not to factory specifications.

OBDII Code C2508 Chrysler - Engine Max Torque - AutoCodes.com — C2508 Chrysler Code - Engine Max Torque

What does this mean?

What are the Possible Causes of the DTC C2508 Chrysler?

Faulty Powertrain Control Module (PCM)
Powertrain Control Module (PCM) harness is open or shorted
Powertrain Control Module (PCM) circuit poor electrical connection

How to Fix the DTC C2508 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2508 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2508 Chrysler code?

Need more information on how to fix the C2508 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2508 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2508 Chrysler Code

1. What are the common symptoms of OBDII code C2508 in a Chrysler related to Engine Max Torque?

- Common symptoms include a noticeable reduction in engine power and torque, as well as potential issues with acceleration and overall performance.

2. What are the possible causes of OBDII code C2508 Chrysler related to Engine Max Torque?

- The code C2508 in a Chrysler may be triggered by issues such as a faulty torque sensor, damaged wiring harness, or a problem with the engine control module (ECM).

3. How can I diagnose the OBDII code C2508 in a Chrysler related to Engine Max Torque?

- To diagnose code C2508, it is recommended to perform a thorough inspection of the torque sensor, check the wiring for any signs of damage, and use a diagnostic scanner to read the ECM data for further analysis.

4. Is it safe to continue driving a Chrysler with OBDII code C2508 related to Engine Max Torque?

- It is not recommended to continue driving a Chrysler with code C2508 as it can lead to further damage to the engine and other components. Prompt diagnosis and repair are advised.

5. Can I repair OBDII code C2508 in a Chrysler related to Engine Max Torque on my own?

- While some basic troubleshooting steps can be taken, repairing code C2508 often requires specialized tools and expertise. It is recommended to consult a professional mechanic for proper diagnosis and repair.

6. How much does it typically cost to repair OBDII code C2508 in a Chrysler related to Engine Max Torque?

- The cost of repairing code C2508 can vary depending on the specific underlying issue. Costs may include parts replacement, labor charges, and diagnostic fees, which can range from a few hundred to over a thousand dollars.

7. Can a faulty torque sensor be the sole reason for triggering OBDII code C2508 in a Chrysler related to Engine Max Torque?

- While a faulty torque sensor is a common cause of code C2508, it is essential to perform a comprehensive diagnosis to rule out other potential issues such as wiring faults or ECM problems.

8. Are there any preventive measures to avoid OBDII code C2508 in a Chrysler related to Engine Max Torque?

- Regular maintenance, including checking the torque sensor and wiring harness for any signs of wear or damage, can help prevent the occurrence of code C2508 in a Chrysler.

9. Can resetting the ECM clear OBDII code C2508 in a Chrysler related to Engine Max Torque?

- Resetting the ECM may temporarily clear the code, but if the underlying issue causing code C2508 is not addressed, the code is likely to return. It is crucial to diagnose and repair the root cause.